The 9 Best Zvs Induction Heating Module

Deal Score0
Deal Score0
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module
  • The 9 Best Zvs Induction Heating Module

Nowadays, there are so many products of zvs induction heating module in the market and you are wondering to choose a best one. You have searched for zvs induction heating module in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings zvs induction heating module which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

ZVS Driver Module,5V-12V ZVS Low Voltage Induction Heating Power Supply Board+Heating Coil

$10.84$15.49$17.66
Last update was on: Sunday, December 29, 2019

Specification:
Input voltage: DC 5v-12 v
Maximum power 120w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.
PCB size: 55 mmx37 mmx1.6 mm
Heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most not more than two-thirds.

Package Included:
1 x ZVS driver board
1 x heating coil

sainsmart 5V~12V Zero Voltage Switching ZVS Induction Heating Power Supply Module + Coil Power Supply Heating Power Supply Module

$9.09$12.99$18.58
Last update was on: Sunday, December 29, 2019

Parameters:

1. This is no tap mini plate ZVS finished board, with no heating coil, ignition coil, and a cooling fan, etc.
2. The input voltage is DC 5-12V.
3. PCB size: 55 mm * 37 mm * 1.6 mm.

Package List:

1 x ZVS heating power supply module

Note: the product is ZVS heating power supply module, includes the heating coil

1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan

$36.13$51.62$60.4
Last update was on: Sunday, December 29, 2019

Specification:
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
Power supply:
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
Package Content:
1 x PCB board
1 x 48V copper tube

1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V

1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

$27.99$39.99$56.79
Last update was on: Sunday, December 29, 2019

Features:
24V input with no load current of 3A , 48V input with no load current of 6A
buyer need self-provided power and water cooling device
This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter

Note:
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload

Package Includes:
1 x 20A 1000W Flyback driver inductive heater Zero Voltage Switching Tesla
1 x Coil

fosa 2000W Induction Heating Module ZVS High Voltage 24V-70V Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module

Last update was on: Sunday, December 29, 2019

HiLetgo ZVS 20A 1000W Low Voltage Induction Heating Module Flyback Heater Driver Board

$8.39$11.99$16.07
Last update was on: Sunday, December 29, 2019

Description:
This section of induction heating using low-voltage DC power supply 12-48V
Maximum current 20A, maximum power 1000W.
Tested 53V power supply when working properly.
Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment,
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals,uniform heating fast, very convenient.
24V input with no load current of 3A
48V input with no load current of 6A
The higher the voltage, the greater the heating current when the same thing, the effect is better,
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage,
the general use of the words 24V or 36V power supply is enough.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter
1. To increase the heat sink using a customized substrate as thick as 8.5mm!
Cooling capacity is very powerful.
2.Using the M4 pillars, fever smaller, more efficient.

Yosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY

$24.98$35.69$48.54
Last update was on: Sunday, December 29, 2019

Note:

1. The kit contains a full set of driving circuit elements and brass

2. Buyers need to bring their own power and cooling unit.

3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.

4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.

So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.

5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.

Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.

This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.

Note:

Make sure to thoroughly cool this while running anywhere near the specified limits (a very high CFM computer fan will help).

You must turn your power supply on first then put the power to the heater or you will burn it up.

Package includes:

1 x ZVS Low Voltage Induction Heating Board 1 x Brass

Semoic 1800W ZVS Induction Heating Board Module Flyback Driver Heater+Tesla coil+fan

$36.33$51.9$61.76
Last update was on: Sunday, December 29, 2019

Semoic,a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. 1800W ZVS Induction Heating Board Module Flyback Driver Heater+Tesla coil+fan
Note: Induction heating power is great, so fever is normal, be sure to do a good job of cooling.
Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
This products maximum power 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc..
In this test, the maximum power is close to 1600W, and the maximum current is 35A. This product is available at under the condition of good heat dissipation, the utility model can work continuously for hours.
Name: ZVS Induction Heating Board Module
Model: 854337
Product size: 180mm x 90mm x 80mm
Heater ring inner: 70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12Vgreater than equal 10A , 15V above greater than equal 15A
Maximum power: 1800W
Maximum current: 40A
colour: black
Material: plastic + metal
Package Included
1 x PCB board
1 x 48V copper tube
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

ILS – 5V -12V ZVS Induction Heating Power Supply Module with Coil

$6.29$8.99$10.07
Last update was on: Sunday, December 29, 2019

Features:
Input voltage: 5v-12vModule dimensions: 5.5 x 4 x 2 cm(L*W*H)Coil size: length:7.5cm width: 2.8cm
Package Included:
1 x induction heating power supply module1 x coil

Conclusion

By our suggestions above, we hope that you can found zvs induction heating module for you.Please don’t forget to share your experience by comment in this post. Thank you!

10 Total Score
Excellent

Best zvs induction heating module: Top-Rated Brands & What to Buy

User Rating: 4.62 (380 votes)