homedecorcreation 
Nowadays, there are so many products of water filter housing 10 inch pentek blue in the market and you are wondering to choose a best one. You have searched for water filter housing 10 inch pentek blue in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter housing 10 inch pentek blue which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
18,415 Reviews Scanned
Housing Bracket for Big blue 10" and 20" filter housings
White powder coated steel twin mounting bracket for 5000 Series, 10000 Series, and YTB 10″ & YTB 20″ Filter Housings.
Pentek 150296 SW-3 Wrench for #10 Big Blue Housings
This Pentek 150296 SW-3 wrench is used to loosen the sumps of water filter housings. It is made of strong plastic. This wrench fits the sumps of Pentek #10 Big Blue filter housings, which are used in a wide variety of applications, including drinking water purification, irrigation, and industrial processes, among others.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings
This Pentek 150578 MC-1A bracket is used to mount filter housings on a vertical surface. It is made of strong metal. This bracket is used with Pentek #10 and #20 3G MB housings with 3/4″ connections, which are used in a wide variety of applications, including drinking water purification, irrigation, and industrial processes, among others.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
What’s in the Box?
- Pentek MC-1A filter housing bracket
- (4) mounting screws
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Aquaboon 5 Micron 10" Big Blue String Wound Sediment Water Filter Cartridge | Whole House Sediment Filtration | Compatible with 84637, WPX5BB97P, PC10, 355214-45, 355215-45, WP10BB97P WP5BB97P 2-Pack
- ???? [DIMENSIONS] 10 inches x 4.5 inches – 2 Pack of 5 Micron Big Blue String Wound Sediment Filter Cartridges. Universal water filter replacement – fits most 10 inch Big Blue Water Filter housings.
- ???? [QUALITY FILTRATION] Made of 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge. Contains no binders, agents, solvents, antistatic materials or wetting agents. The String Wound sediment filter is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. Great for well and municipal water.
- ???? [LIFETIME] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [COMPATIBLE REPLACEMENT FILTERS] ClearChoice 84637, Culligan WPX5BB97P, Pelican PC10, PC40, PC20, Pentek 355214-45, WP5BB97P, WP10BB97P, 355215-45, US Filter WPX5BB97P, etc.
- ???? [COMPATIBLE HOUSINGS] Pelican NS3, NS6, PC1000, PC600, PSE1800, PSE2000, WF4, WF8, etc. Fits most 10 inch Big Blue Whole House systems.
2 OF 5 MICRON 10” X 4.5″ BIG BLUE WHOLE HOUSE STRING WOUND SEDIMENT PP WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON
The string wound sediment filter is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. String wound filter cartridge is made from 100% polypropylene cord. The filter cartridge is suitable for residential as well as commercial applications. This sediment type filter is suitable for both well and municipal water.
Features:
Micron rating: 5 Micron
Dimensions: 10” x 4.5”
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge
Larger particles are trapped in the outer layers; smaller particles penetrate deeper
Greater dirt holding ability and longer life than non-layered cartridges
Thermally bonded polypropylene micro fibers for purity and chemical compatibility
Contains no binders, agents, solvents, antistatic materials or wetting agents
No surface binders to reduce flow and increase change-out frequency
Cartridge is individually shrink wrapped
COMPATIBLE FILTERS AND HOUSINGS:
ClearChoice 84637, Culligan WPX5BB97P, Pentek 355214-45, WP5BB97P, WP10BB97P, Pelican PC10, PC40, PC20, 355215-45, US Filter WPX5BB97P, etc. Universal replacement – fits most 10 inch Big Blue Whole House systems like Pelican NS3, NS6, PC1000, PC600, PSE1800, PSE2000, WF4, WF8, etc.
Whole House Mounting Bracket for Big Blue 10" and 20" Water Filter Housing by Aquaboon | Compatible with Pentek 244047, 150578, MC-1A, 150061, Hydronix FM-25W
- ????[FILTER TYPES] Housing bracket for big blue is meant to hold 10″ and 20″ systems filled with water. A special space for pressure release button allows you to attach a filter with or without the one. You can consider such brands like Pentek, Geekpure, Culligan, Hydronix, iSpring.
- ????[INSTALLATION] At first, you should mount the whole house housing bracket to the wall, post or any other kind of panel with the help of screws (not included). Then connect the top of the system to the underside of the water filter housing bracket. After that you can be sure the product securely supports the filter, because it is made of a durable, heavy-duty steel.
- ????[CAPABILITY] Filter housing mounting bracket is made to hold only one system. It is reversible and offers left-to-right or right-to-left flow. A white coat doesn’t only make the thing be accurate and pleasant in use but also protects against rust. This product is designed to ease your plumping work.
- ????[COMPATIBLE BRACKETS] Pentek 244047, 150578, MC-1A, 150061, Hydronix FM-25W, Aqua Pure AP-MB801, Geekpure WBA, Camco 40635, Watts Premier BB-HB, Water Filters Depot (WFD) HB-20-S, WB-SS, 150061.0, 150578-75, Culligan 4115341, Watts BRK1-45100-PCL, Viqua FM-30, FM-25, FM-10, uxcell a17041400ux1283, Ronaqua RA-7HB-1, RA-6HB-1, RA-2HB-1, RA-1HB-1, WMB20 150061, OMNIFilter BF7MB-S-S06, BF7MB-R-05, FM-10W, EZ-Flo 22068, 22070, DuPon 569986, AMI H-B2039W, H-B2010W.
- ????[COMPATIBLE HOUSINGS] SimPure RSWHB002Z_S8, Culligan HD-950A, Geekpure BB-20T, Hydronix HF45-10BLBK15, iSpring HB18B, HB28BX2, Max Water B078FPN68M, OKSLO KTTR7942, OMNIFilter WH5-S-S06, Pentek 150469, 166219, HFPP-34-PR-10, HFPP-1-PR10, HFPP-PR10, HFPP-112-PR10, HFPP-1-WPR10, 150237, 150237#10, 158116, 150235, 150467, 158117, STANDARD-34-PR-10, 158110, 150069, 166201.0, 150070, HFPP-1-PR20, 150239-75, 150068, 150239, HD-950, BIG-CLEAR-LX-10, 166219.0, 158129, 150233.
BRACKET FOR WHOLE HOUSE BIG BLUE
The lifetime of any water filter cartridge some day or other ends. The filter filled with sediment can lead to undesirable side effects such as water quality loss, water pressure drop in pipes or emergence of microbes. Aquaboon offers housing bracket for big blue 10″ and 20″ filter housings for you not to expend time and energy in changing filter cartridge. With our sturdy product it is quick and easy to do. The length of the bracket is 6 3/4″, its widths – 4 1/8″. The housing can be installed in any position (horizontally or upside down). However, the system is recommended to be mounted vertically, otherwise cartridge replacement work will be messy and clumsy. You can attach the housing bracket big under the sink or other convenient location. But put attention that filter must be protected from freezing and direct sunlight. Don`t forget to obtain nuts and washers separately (stainless steel is recommended).
Compatible brackets:
Viqua FM-20, Ronaqua RA-8HB-1, RA-9HB-1, RA-10HB-1, RA-3HB-1, RA-4HB-1, Pentek 244047-75, MC-1A-KIT, Culligan 8625480, WB-SS, HD-950, CFS CFS-173, Aqua Pure FBA_8901-31.
Compatible housings:
Water Filters Depot (WFD) H-20BB-1PR, Premier Water Systems 4520WHFH2PK, WF45-20-1NPT, Pentek 150238, 166141, Hydronix HX-HF45-20BLBK10, HF45-10BLBK34, HF45-10BLBK10, HF45-10BLBK34PR, HF45-10BLBK10PR, HF45-10BLBK15PR, HF45-10CLBK10, HF45-10CLBK10PR, H2O Splash WHBB20T1BL, Applied Membranes H-H201BBE.
Pentek 3/4" Threaded 10" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150469 150061 150296)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includes :
✪ Genuine Pentek 3/4″” #10 Big Blue filter housing (Pentek # 150469) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 150296)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►3/4” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 10” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 100 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 1" Threaded 10" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150237 150061 150296)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includs :
✪ Genuine Pentek 1″” #10 Big Blue filter housing (Pentek # 150237) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 150296)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►3/4” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 10” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 100 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance.
Conclusion
By our suggestions above, we hope that you can found water filter housing 10 inch pentek blue for you.Please don’t forget to share your experience by comment in this post. Thank you!
