homedecorcreation 
Nowadays, there are so many products of water filter cannister in the market and you are wondering to choose a best one. You have searched for water filter cannister in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter cannister which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
29,720 Reviews Scanned
Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Hydronix HF3-10CLBK34 10" Clear Housing with Black Rib Cap, 3/4" Ports
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Geekpure 10-Inch Standard Slim Line Blue Filter Housing for 2.5" x 10" Filter -3/4" Brass Female NPT Inlet/Outlet with Pressure Relief Wrench and Bracket
- COMPLETE-Complete 1 set 10 inch blue housing,3/4 inch brass ports with pressure relief button for high pressure,with plastic wrench and bracket.
- STANDARD-Fits all standard sized 2.5 inch x 10 inch filters housing only, filter cartridges are sold separately.
- APPLICATIONS-Used for whole house, reverse osmosis water filtration system.
- WARRANTY-Fits NSF standard.One year limited warranty.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA),30 Days Money Back Guarantee.
Hydronix HF3-10CLWH34PR 10" Clear Housing with White Rib Cap, 3/4" Ports with Pressure Relief Button
Hydronix HF3 Series Slim Rib Cap Filter Housings have pressure relief (PR) buttons and are ideal for typical applications such as pre- and post-filtration for RO systems, under sink filters, counter top systems, ice machines, food service and other applications. Hydronix HF2 Series housings are available in a variety of colors and are made to house 2.5″ diameter cartridges. Most 9 7/8″ and 10″ cartridges fit easily and caps are available in 1/4″, 3/8″ and 1/2″ female NPT ports.
MarineLand Magnum Polishing Internal Canister Filter
- The Marineland Magnum Polishing Internal Canister Filter uses powerful three stage filtration to ensure water clarity
- Water polishing option removes fine debris, leaving water crystal clear
- The Marineland Magnum Polishing Internal Canister Filter filters 290 gallons per hour and is ideal for aquariums up to 97 gallons
- No priming necessary. The submerged motor means quick and easy setup
- Dual-chamber media container allows for customizable media – Black Diamond Carbon is included
The Marineland Magnum Polishing Internal Canister Filter uses two refillable chambers to house carbon or customizable filter media. The Magnum PI Canister Filter is the most versatile filter Marineland has to offer. The submerged motor mean quick and easy start up, no priming necessary.
Similar items with 4 stars and above
IPW Industries Inc Compatible to Water Pur Company CCI-10CLW12 Filter Canister and (2) CCI-10-Ca Water Filters
Compatible to Water Pur Company CCI-10CLW12 Filter Canister and (2) CCI-10-Ca Water Filters
This product listing includes the following:
(1) Compatible Water Pur Company CCI-10CLW12 Water Filter Canister
(2) Compatible Water Pur Company CCI-10-Ca 10-inch Water Filters Compatible too the Water Pur Company CCI-10-Ca 10-inch Water Filter filters all water going into your boat or RV, not just drinking water, thereby protecting your complete plumbing system from contaminants.
It provides filtered cold and hot water to your bathroom, kitchen and galley. It is used as a replacement water filter used in Forest River RVs model year 2004 to 2014. This water filter is designed to fit the Water Pur Company CCI-10CLW / CCI-10CLW12 filter housing.
Product Dimensions: Housing measures 10-1/2″ in height Lid measures 1-5/8″ in height Specifications: Max Working Pressure: 100 PSI Max Working Temperature: 100 Degrees Fahrenheit Do Not Allow This Unit To Freeze Recommend Replacement of Filter Cartridge Every 12 Months Replacement Cartridge Model Number Compatible to CCI-10-Ca This is a non OEM replacement product.
**Please note housing may appear slightly different in appearance depending upon availability.
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Conclusion
By our suggestions above, we hope that you can found water filter cannister for you.Please don’t forget to share your experience by comment in this post. Thank you!
