Best Water Cooling Block Gpu Gtx 1050

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

ARCTIC offers innovative solutions incessantly – changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people’s lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor – a constant our customers rely on.

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

The EK-Vector FTW3 RTX 2080 Ti RGB high-performance water block is specially designed for EVGA FTW version of NVIDIA® GeForce® RTX 2080 Ti graphics cards. The water block features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.

The water block directly cools the GPU, VRAM and the VRM, and uses an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with pumps running at slower speeds. The jet plate and fin structure has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated copper while the top is CNC machined out of acrylic. Sealing is ensured by EPDM O-rings.

It features four integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block which is compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″” threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of Scalar GPU Terminals.

Both the NVIDIA® and EVGA NVLink™ are compatible with this water block.

Enclosed:

– EK-Vector FTW3 series high-performance water block
– Necessary mounting hardware
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease

PLEASE NOTE:
EVGA FTW3® RTX 2080Ti factory backplate is not compatible with this water block. This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109816783

The Corsair Hydro x series XG7 rx-series GPU water block is a total conversion solution for your Radeon RX 5700 XT graphics card. Precision CNC-milled nickel-plated copper construction and more than 50 high-density cooling fins positioned over the GPU maximize thermal transfer and Surface area, for dramatically lower temperatures and maximum performance. A fully transparent flow path and discrete RGB lighting puts your graphics card on full display, When combined with a Corsair iCUE lighting Node Pro or iCUE Commander Pro and Corsair CUE software. A full-length aluminum casing and included backplate encloses all your graphics card’s critical components for a total conversion to custom cooling. With pre-applied thermal material, standard G1/4” threads and easy to follow step-by-step instructions, it’s never been easier to unlock the true potential of your Radeon RX 5700 XT. Tech Support # 1-888-222-4346 opt # 1

Description:
2 holes on the side of the cover, the water flows from the side.
0.8 mm copper columns on the copper base.
The water contact area becomes large, so the block can carry more heat from GPU quickly.
The surface flatness is less than 0.01 mm.The base can fit the GPU better, so that it can absorb more heat.The copper base is processed with anti-oxidization technology.
Installation Accessories: Get a 4 mounting screws.
Support 43*43 48*48 53*53 three hole spacing.
Suitable for graphics cards below 1050.

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities: EVGA RTX2080TI FTW3

100% new, fine workmanship, simple sense is very strong!
N-AS1050SI-X built for ASUS GTX1050 GTX1050TI Specifications of the graphics design ,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block directly to the cooling core graphics (GPU), memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature
Video card water head is designed using large flow, even if hm weaker pump can meet the demand
Water ccoling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water head is free to change direction, convenient players form a SLI system, can be in series or in parallel
parts list:
fast twist X 2
plugs X 2
thermal paste X 1
mounting screws X1
Compatible model:
RGB LED X 1
Compatible graphics card type:ASUS DUAL-GTX 1050-2G
Compatible graphics card type:ASUS DUAL-GTX 1050TI-4G
Compatible graphics card type:ASUS EX-GTX 1050-2G
NOTE: If you are unsure whether compatible, please contact the seller or view graphics brands and models, because the description have mentioned writing compatible graphics card name and model number .

Phanteks’ Glacier G2080Ti STRIX provides high-performance water cooling custom designed for the latest Asus RTX 2080/2080Ti STRIX cards. It is made from premium materials according to the finest standards of craftsmanship from Phanteks. VITON sealing from the Automotive and Aerospace Industries ensure the best reliability and longevity. The Glacier G2080Ti STRIX features integrated Digital-RGB lighting and is compatible with the original Asus STRIX backplate. Compatible with Asus ROG Strix RTX 2080/2080Ti. Digital RGB LED strip hard board (+5V, data, empty, Ground).

Conclusion

By our suggestions above, we hope that you can found water cooling block gpu gtx 1050 for you.Please don’t forget to share your experience by comment in this post. Thank you!