homedecorcreation 
Nowadays, there are so many products of state gas hot water tank in the market and you are wondering to choose a best one. You have searched for state gas hot water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings state gas hot water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
34,406 Reviews Scanned
Reliance Water Heater Pilot Assembly 100109295 9003542005 Replacement Part Natural Gas Compatible with Reliance, A.O. Smith, and State Branded Tanks
Reliance Water Heater Co 9003542 Natural Gas Pilot Assembly
RELIANCE WATER HEATER CO 9007884005 Honey Electronic Gas Valve
Reliance 300 series, Honeywell electronic gas control valve, thermostat powered by 750 millivolt generator, noticeable red LED indicator light blinks 1 time at 3 second intervals during normal operation, increased temperature control & accuracy, integral spark Igniter, fits reliance standard natural gas water heaters with Honeywell control.
Reliance Hot Water Heater Gas Control Valve 100112336 9007884005 100093974 1" Cavity Thermostat Compatible with Reliance, State, A.O. Smith, and American branded heaters
- Temperature control assembly 100112336 supplies the burner with gas to heat the water
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, and American branded heaters
- Intended use with a gas hot water heater
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. Installing the valve and then returning used is prohibited. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, and Reliance.
Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing Natural Gas
- NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE
- STANDARD 24″ LENGTH
- FITS MANY BUT NOT ALL WATER HEATERS ON THE MARKET.
- SYSTEM MUST BE CHECKED FOR LEAKS BEFORE OPERATION
- WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE STANDARD 24″ LENGTH FITS MANY WATER HEATERS ON THE MARKET WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT The 113884-01 Fits Desa, Reddy, All-Pro, Universal, NR, Sears, Remington and many other Propane Forced Air Heaters Fit Models: RLP55V, RLP125V, REM55PV, REM125PV, 85-FAC, 125-F, TB115, SPC-85, SPC125, BLP55V, WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
Rinnai V65IN 6.6 GPM Indoor Low NOx Tankless Natural Gas Water Heater
Product Description
Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply
From the Manufacturer
Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT
PREMIER PLUS 6911165 132266 Plus Natural Gas Water Heater Burner Assembly For Model Bfg 40S40 Or Series 100
Premier Plus natural gas water heater burner assembly for 6911165 bfg 40s40 or series 100. Can also be used on equivalent American & U.S. Craft master brands series 100 units. The product is manufactured in United States.
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
Kenmore 9003458 Water Heater Burner Assembly Genuine Original Equipment Manufacturer (OEM) Part
- This part is compatible with models including
- 153336465,153336520,153336466,153336566,153336420,153336464
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 9003458005
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore
- This burner assembly (part number 9003458) is for water heaters
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
Genuine Original Equipment Manufacturer (OEM) parts! This burner assembly (part number 9003458) is for water heaters. Burner assembly 9003458 heats the water in the water tank. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. The gas supply line connections must be checked for leaks after installing this part. For Kenmore.
Conclusion
By our suggestions above, we hope that you can found state gas hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
