homedecorcreation 
Nowadays, there are so many products of solder iron heating element in the market and you are wondering to choose a best one. You have searched for solder iron heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings solder iron heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Fdit Electric Soldering Iron Handle Solder Station Repair Tool with A1322 Heating Element Portable Rubber Handle 50W(5 Pin)
- ★This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces.
- ★Heated metal tip to do the soldering work precisely and protect the sensitive components as well.
- ★High quality ceramic heating core for long service time. Insulated handle design makes it is safe and comfortable to operate.
- ★50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works.
- ★We care for all customer’s feeling. If this product does not meet or exceed your expectations, please send it back for a 100% refund no questions asked.
Fdit is a selfless and careful home-kitchen supplies craftsman,he devotes himself to provide the top-notch home-kitchen supplies to the common folk.
We take each order seriously while our customers choose our product, because it is about your convenient life.
This is not a joke,we believe you care your family greatly!
Specifications:
Condition: 100% brand new
Material: metal, rubber
Heating Element Type: A1322
Color: as picture shown
Type: 5 Hole, 5 Pin (optional)
Power: 50W
Voltage: DC 24V
Replacement handle: for 936 937 898D
Length: approx. 19cm / 7.48inch
Weight: approx. 83g
Usage:
1. Welding can be carried out 2 minutes after the electricity
2. Can be used at welding temperature.
3. Unplug the power if not used for long time to extend life of the heater and iron head.
4. Tin should be kept on iron head in use and after use.
Attentions:
1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head.
3. Thermo elements andiron head are strictly prohibited to be demolished or replaced when iron is in electricity.
4. It is normal for heating elements to have a slight fever with smoke after the first electricity, they’ll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably.
6. Power wires and heating core should be replaced by full-time staff when they do not work well.
Package Included:
1 * Soldering Iron
Notes:
Please take care of yourself while using this item.
Electric Soldering Iron Handle Solder Station Repair Tool with A1322 Heating Element Portable Rubber Handle 50W(5 Hole)
- ★ This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces.
- ★ Heated metal tip to do the soldering work precisely and protect the sensitive components as well.
- ★ High quality ceramic heating core for long service time. Insulated handle design makes it is safe and comfortable to operate.
- ★ 50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works.
- ★ We care for all customer’s feeling. If this product does not meet or exceed your expectations, please send it back for a 100% refund no questions asked.
Fdit is a selfless and careful home-kitchen supplies craftsman,he devotes himself to provide the top-notch home-kitchen supplies to the common folk.
We take each order seriously while our customers choose our product, because it is about your convenient life.
This is not a joke,we believe you care your family greatly!
Specifications:
Condition: 100% brand new
Material: metal, rubber
Heating Element Type: A1322
Color: as picture shown
Type: 5 Hole
Power: 50W
Voltage: DC 24V
Replacement handle: for 936 937 898D
Length: approx. 19cm / 7.48inch
Weight: approx. 83g
Usage:
1. Welding can be carried out 2 minutes after the electricity
2. Can be used at welding temperature.
3. Unplug the power if not used for long time to extend life of the heater and iron head.
4. Tin should be kept on iron head in use and after use.
Attentions:
1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head.
3. Thermo elements andiron head are strictly prohibited to be demolished or replaced when iron is in electricity.
4. It is normal for heating elements to have a slight fever with smoke after the first electricity, they’ll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably.
6. Power wires and heating core should be replaced by full-time staff when they do not work well.
Package Included:
1 * Soldering Iron
Notes:
Please take care of yourself while using this item.
YAOGONG Soldering Solder Iron 1322 Heating Element for Replacement Solder Iron 907/ESD 936 Station Handle Tool(Five holes)
- ANTI-STATIC DESIGN:prevent static electricity leak and damage delicate SMD components.
- PROTABLE:Handle special light weight, suitable for prolonged use.
- SAFETY:Soldering iron handle double-sided circuit board design, not only guarantees the quality but also to ensure longer life.
- HIGH QUALITY:Use high-quality ceramic heater and copper tips,heating elements and most of the soldering station universal, easy to replace.
- FAST HEATING:instantaneous temperature compensation, precise temperature control and stability.
It is five-core interface (Before purchase, please check whether the interface is matching your machine).
Aoyue 9378 Pro Series 60 Watt Programmable Digital Soldering Station – ESD Safe, includes 10 tips, C/F switchable, Configurable Iron Holder, Plug-in Spare Heating Element
- Vibration sensor in handle to detect movement
- Digital thermostat control with switchable °C / °F readout
- Programmable sleep Function to increase tip life
- 60 watt iron with over 50 available tip sizes (10 tips included with 1 installed)
- 2 quick temperature programmable presets, Plug-in heater element
Jocestyle 50W 24V Heating Element 1322 Soldering Iron Ceramic Heater Core 4-wire Adapter Heating Tool for Solder Iron Station
TITACUTE Soldering Iron Handle, FX-8801 Soldering Iron Handle 6 Pin with A1321 Ceramic Heating Element 26V 65W Soldering Handle Replacement for HAKKO FX-888 FX-888D Solder Iron Station Black
- Soldering Iron FX-8801 works on Hakko FX-888 FX-888D solder iron station.
- High efficiency A1321 ceramic heating element we uses, precise temperature control and stability, prolong the using life.
- Double-side circuit board design to provide high insulation, handle covered with non-slip silicone sleeve for heat insulation, safe for use.
- Portable slender handle with ergonomic design provides comfortable grip to reduces hand fatigue even during continuous soldering operation.
- What You Get: All TITACUTE products are backed by our 180-Day Worry-free Replacement . If you have any issue, please don’t hesitate to contact with TITACUTE Customer Service.
Similar items with 4 stars and above
NovelLife 65W Mini TS100 Electric Soldering Iron Kit,Adjustable Temperature,Programmable STM32 Chip,Digital OLED Screen Display with TS B2 Solder Tip,Power Supply,XT60 Power Cord (Black B2 Tip)
- ★POCKET SIZED and SAFE★Not like the traditional electric soldering station, this original TS100 mini digital soldering iron has a smaller size the same as a pen with 304 stainless steel nested polycarbonate housing and ESD safety circuit, lightweight for portable carry easily and safe to use
- ★FAST HEATING SPEED★Adopts internal heating mode with ceramic effective heating element to reach the set temperature in about 10s,save your working time
- ★SMART★ Built-in SMT32 MCU,dual temperature sensor and acceleration sensor with application layer open source design, you can change the various default parameter settings such as standby time/temperature,operating temperature,temperature unit(C/F) even the boot screen logo
- ★EASY OPERATION★ OLED screen readout the parameters and two momentary push button to control and set the parameters,100-400℃ adjustable temperature range, Support auto sleep mode witout operation in 3 minutes to save the energy ideal for circuit board and fields repair
- ★PRACTICAL and SAFE★Comes with 65W DC power supply,mini soldering stand,1.5m long ESD ground clip wire and XT60 power cable enable you to power the solder directly no more parts needed
This is original ts100 soldering iron and comes with NovelLife customized high quality power supply, XT60 power cable and ESD ground clip ensure you use it easily and we provide 2 years warranty( the tip is not within this warranty).
★POCEKT SIZE AND PRACTICAL★
Original TS100 mini digital soldering iron has the size the same as a pen smaller than the traditional electric soldering station
Internal heating with ceramic heating element and fast heating speed,reach the setting temperature in about 10s
DC12V-24 low working voltage with DC5.5*2.5 power port can be powered by laptop power supply,drone lithium-ion battery directly
OLED screen display the parameters and two momentary push button to control with 100-400℃ adjustable temperature range
★SMART★
Built-in SMT32 MCU,dual temperature sensor and acceleration sensor with application layer open source design you can change the various default parameter settings such as standby time/temperature,operating temperature,temperature unit(C/F) even the boot screen logo
Support temperatur automatic calibration,sleep mode,low voltage protection and over temperature protection
Auto standby mode without operation in 3 minutes(time adjustable) to save the energy and protect iron
Specifications:
Power:40-65W
Input Voltage:DC12-24V
Power Supply Port:DC5.5*2.5mm
Temperature Adjustable Range:100-400 celsius degree
Temperature Stability Range:±2%
Working Temperature:300 celsius degree(default)
Dormancy Temperature:200 celsius degree(defanlt)
Overall Length:168mm/6.61inch(after installed bit)
Package Included:
1X TS100 Electric Soldering Iron
1X B2 Soldering Iron Bit
1X 65W DC Power Supply
1X XT60 Power Cable
1X Mini Soldering Stand
1X 1.5 Meter Long Ground Clip
Similar items with 4 stars and above
50W Electric Soldering Iron Solder Station Repair Tool with A1322 Heating Element(5 Hole Plug)
- This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces
- Heated metal tip to do the soldering work precisely and protect the sensitive components as well
- High quality ceramic heating core for long service time
- nsulated handle design makes it is safe and comfortable to operate
- 50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works
Specifications:
Material: metal, rubber
Heating Element Type: A1322
Color: as picture shown
Type: 5 Hole, 5 Pin (optional)
Power: 50W
Voltage: DC 24V
Replacement handle: for 936 937 898D
Length: approx. 19cm / 7.48inch
Weight: approx. 83g
Usage:
1. Welding can be carried out 2 minutes after the electricity
2. Can be used at welding temperature.
3. Unplug the power if not used for long time to extend life of the heater and iron head.
4. Tin should be kept on iron head in use and after use.
Attentions:
1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head.
3. Thermo elements andiron head are strictly prohibited to be demolished or replaced when iron is in electricity.
4. It is normal for heating elements to have a slight fever with smoke after the first electricity, they’ll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably.
6. Power wires and heating core should be replaced by full-time staff when they do not work well.
Package Included:
1 * Soldering Iron
USA EXCLUSIVE X-TRONIC MODEL #3030-XTS TRAVEL KIT – Includes Control Module With Blue LED Display & Variable Heat 65 Watt Soldering Iron, Spare Element, Tip Cleaner with Cleaning Flux & 4 Solder Tips
- Travel Kit Includes: 65 Watt Soldering Iron With Inline Control Module With Blue LED Display
- Soldering Iron Features PID Technology – Temp Range 392°F ~ 896°F/200°C ~ 480°C
- Kit Comes with Aluminum Travel Case, Soldering Iron, 4 Solder Tips, Heat Element & Brass Cleaner
- Soldering Iron Features a 10 Minute Sleep Timer and the Temperature Stability is ±3.6°F/2.0°C
- All X-Tronic Products come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. PLEASE SCROLL DOWN THIS PAGE FOR MANY MORE PHOTOS & INFORMATION ON THIS PRODUCT!
Introducing The All New USA EXCLUSIVE X-Tronic Model #3030-XTS Travel Case Kit.
The X-Tronic 3030-XTS Travel Kit is Compact, Lightweight and Easy to Carry or Transport to your Job Site and Works Just as Well on your Workbench. The Complete Kit is Manufactured by X-Tronic for the Expert or Professional and Will Exceed your Expectations of Quality and Durability. In Other Words, this is NOT a Plug & Play TOY!
The Complete Kit Includes:
1 – 65 Watt Soldering Iron
1 – Slimline Soldering Iron Holder
1 – Inline Control Module With a Blue LED Display
1 – Extra Heating Element
4 – Soldering Tips (One is included in the Soldering Iron)
1 – Brass Sponge Tip Cleaner with Cleaning Flux
Specifications:
ESD Safe
Soldering Iron Output: 65 Watts
10 Minute Sleep Timer
Centigrade to Fahrenheit Toggle Switch
Blue LED Readout on Control Module
PSD Technology (Magic Temp Technology)
Temperature Stability LED Display Light
Temperature Range: 392°F ~ 896°F/200°C ~ 480°C
56 Inch Power Cord – From Plug to Inline Control Module
55 Inch 100% Silicone Cord (Virtually NO Memory) – From Tip of Soldering Iron to Control Module
117 Total Inches from Plug to Tip of Soldering Iron
AC 110V/120V – 60 Hz – NO 220V Available
This X-Tronic unit is a Very High Quality – ESD Safe Digital Soldering Iron unit. The 3030-XTS also features “Magic Temperature Compensation Technology” to maintain tip temperature stability. You can easily change the LED digital readouts from “Centigrade to Fahrenheit” for the Soldering Iron Temperature with a flip of the switch.
Soldering Iron Maxmartt 1 PC Of Hand Held 50W Electric Soldering Iron Tool Solder Station Repair Tool With A1322 Heating Element 5 Pin
- The tool is made of high quality material and can be used for a long service time.
- This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces.
- Heated metal tip to do the soldering work precisely and protect the sensitive components as well.
- 50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works.
- Insulated handle design makes it is safe and comfortable to operate,which protects your hand from scald.
Features:
The tool is made of high quality material and can be used for a long service time.
This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces.
Heated metal tip to do the soldering work precisely and protect the sensitive components as well.
50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works.
Insulated handle design makes it is safe and comfortable to operate,which protects your hand from scald.
Specifications:
Condition: 100% brand new
Material: metal, rubber
Heating Element Type: A1322
Color: as picture shown
Type: 5 Pin
Power: 50W
Voltage: DC 24V
Replacement handle: for 936 937 898D
Length: approx. 19cm / 7.48inch
Weight: approx. 83g
Package Includes:
1 * Soldering Iron hand shank
Usage:
1. Welding can be carried out 2 minutes after the electricity
2. Can be used at welding temperature.
3. Unplug the power if not used for long time to extend life of the heater and iron head.
4. Tin should be kept on iron head in use and after use.
Attentions:
1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head.
3. Thermo elements andiron head are strictly prohibited to be demolished or replaced when iron is in electricity.
4. It is normal for heating elements to have a slight fever with smoke after the first electricity, they’ll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably.
6. Power wires and heating core should be replaced by full-time staff when they do not work well.
Notes:
Please take care of yourself while using this item.
Conclusion
By our suggestions above, we hope that you can found solder iron heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
