homedecorcreation 
Nowadays, there are so many products of slash cooling fan in the market and you are wondering to choose a best one. You have searched for slash cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings slash cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Hot Racing MH550TE06 Blue Multi Mount Fan Heat Sink 36mm Motors, Blue
Blue Colored heat sink with Cooling Fan Can be adjusted to fit Traxxas Slash, Stampede, Rustler, Bandit, Etc. FEATURES: Aluminum heat sink and cooling fan helps motor to run cooler YOU WILL RECEIVE: One motor heat sink with cooling fan with red 2-pin wire connector REQUIREMENTS: Installation on motor SPECIFICATIONS: length: 1.7 (43mm) width: 1.4 (37mm) height: 1.6 (40mm).
Hot Racing ESC303T06 Velineon Vxl-S3 Esc Aluminum Heat Sink High Velocity Fan
- Made by Hot Racing
- Hot Racing is a United States based company
- parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components
- additional parts are not required
- Hot Racing part number ESC303T06
- UPC 083745602272
- This item works with: Traxxas Bandit Electric, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Slash 4×4 all versions, Stampede 4×4 VXL, Stampede Electric, Stampede VXL, Stampede XL-5
This is the optional aluminum heat sink with cooling fan for the Traxxas Velineon vxl-3 electronic speed control from hot racing features: Screw secure clamp on aluminum heat sink. Added heat sink cooling area. Mount higher to allow better airflow high Velocity fan simple installation plug right in with the VXL-3s ESC. You will receive: one high Velocity fan one set of heat sink mount.
Powerhobby Cooling Fan for Traxxas Velineon ESC VXL-3 / VXL3 Green FITS : 4-Tec 2.0 Bandit Rally Rustler VXL Slash 2wd / 4×4 Stampede 4×4 VXL
Powerhobby Cooling Fan FOR Traxxas Velineon VXL-3 ESC Green
Featuers :
Heat is the enemy, especially when it comes to Electronics. Powerhobby Cooling fan for the Traxxas Velineon VXL-3 ESC reduces ESC temperatures during extended operation for maximum power flow. Simple installation, Plug right in with the VXL-3S ESC
Fits But not limited to :
4-Tec 2.0 VXL AWD Chassis
Bandit VXL
Ford Fiesta® ST Rally
Rally VXL
Rustler VXL
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4
Slash VXL
Stampede 4×4 VXL
Stampede VXL
Includes : 1 Cooling Fan
Powerhobby Cooling Fan for Traxxas Velineon ESC VXL-3 / VXL3 Red FITS : 4-Tec 2.0 Bandit Rally Rustler VXL Slash 2wd / 4×4 Stampede 4×4 VXL
Powerhobby Cooling Fan FOR Traxxas Velineon VXL-3 ESC Red
Featuers :
Heat is the enemy, especially when it comes to Electronics. Powerhobby Cooling fan for the Traxxas Velineon VXL-3 ESC reduces ESC temperatures during extended operation for maximum power flow. Simple installation, Plug right in with the VXL-3S ESC
Fits But not limited to :
4-Tec 2.0 VXL AWD Chassis
Bandit VXL
Ford Fiesta® ST Rally
Rally VXL
Rustler VXL
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4
Slash VXL
Stampede 4×4 VXL
Stampede VXL
Includes : 1 Cooling Fan
Hobbywing Ezrun 5V C4 Cooling Fan & 44 x 65mm Motor Heat Sink System RC Motor Fan For 1/8 Car#86080130 Blue,Get funshobby decal
Specification:
-Fan input voltage: 5V, 4-5 Ni-Mh/NiCd or 2S Lipo
-Heat sink inner diameter: 44mm
-Heat sink length: 60mm
-Cooling Fan Size: 48mm(L) * 48mm(W) * 16mm(H)
-Suit for 4465 motors
Integy RC Model Hop-ups T8074SILVER Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit
- Genuine Integy Parts Ship Fast Direct From Our US Warehouse
- Top-Quality Materials & Superb Craftsmanship
- Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
- Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
- Check The Manufacturer’s Support Website For Cross-Reference Part Search
OVERVIEW: Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors. IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5. 0V and no more than 6. 0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6. 0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5. 0V and no higher than 6. 0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans. Item T8074BLUE Barcode: 91789006233
Integy RC Model Hop-ups T8074RED Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit
- Genuine Integy Parts Ship Fast Direct From Our US Warehouse
- Top-Quality Materials & Superb Craftsmanship
- Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
- Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
- Check The Manufacturer’s Support Website For Cross-Reference Part Search
OVERVIEW: Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors. IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5. 0V and no more than 6. 0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6. 0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5. 0V and no higher than 6. 0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans. Item T8074RED Barcode: 91789014829
kwanchan Traxxas 3340 Velineon ESC Cooling Fan Slash 2WD
- Make sure this fits. by entering your model number.
- Keeps your VXL-3 running cooler
- Simple installation requires only snapping the fan housing on the ESC and plugging in the connector on the ESC to the fan
- Includes:One Cooling Fan Unit with installation sheet
- Specs:Length: 1.56″ (39mm) Width: 1.34″ (34mm) Height: .83″ (21mm) including clips – .47″ (12mm) not including clips
Traxxas 3340 Velineon ESC Cooling Fan Slash 2WD
Traxxas VXL Dual Fan Wiring Harness – JST Plug Splitter -1M2F Plug & Play – Slash – Stampede – Rustler – This harness allows use of TWO fans powered by single output on VXL ESC. – Premium Quality – Handmade in USA
Run two accessories at once. For example: Run one of our sets of lights along with an ESC cooling fan for your motor off one power port on your receiver.
Raidenracing 1/10 Scale RC Crawler Short Course Accessory Realistic Cooling Fan for 1/10 Short Course Slash Twin Hammers HSP SC
1/10 Scale RC Crawler Short Course Accessory Realistic Cooling Fan for 1/10 Short Course SLASH Twin Hammers HSP SC
Conclusion
By our suggestions above, we hope that you can found slash cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
