The 3 Best Refrigerator 134A Kit Kompresor
Nowadays, there are so many products of refrigerator 134a kit kompresor in the market and you are wondering to choose a best one. You have searched for refrigerator 134a kit kompresor in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator 134a kit kompresor which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
12,153 Reviews Scanned
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge:
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz – Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410
- ✅ PART NUMBER RCO410: It’s a high-quality exact replacement part for part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
- ✅ FOR COMPRESSOR SIZES 1/4 to 1/3: Part RCO410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers.
- ✅ EXTENDS LIFE OF YOUR COMPRESSOR: A hard start kit helps your fridge or freezer compressor last longer. It also allows the compressor to work more efficiently, which will help to lower your power bill.
- ✅ DIY-FRIENDLY, 3-in-1 DEVICE: It’s a combination overload, capacitator, and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor.
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation.
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill. For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.<>
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Replaces Several Part Numbers
Know what part number you’re looking for? This hard start kit replaces part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number.
Wadoy RCO410 3 in 1 Compressor Hard Start Capacitor Kit For Refrigerators & Freezers 1/4-1/3 H.P. 115VAC (1)
- Replacement for model No. RCO410 (HS410)
- For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
- Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
- Extremely durable,long lasting refrigerators and freesers and easy to install
- Non-original aftermarket part
Specifications
●Replacement for model No. RCO410 (HS410)
●For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
●Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
●Extremely durable,long lasting refrigerators and freesers and easy to install
Installation Instructions
1. Disconnect power supply.
2. Remove old relay and overload.
3.Push terminal connected to white wire on RCO onto start terminal of compessor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5.Push terminal connected to black wore on RCO onto common terminal of compressor.
6.Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
7.Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
Conclusion
By our suggestions above, we hope that you can found refrigerator 134a kit kompresor for you.Please don’t forget to share your experience by comment in this post. Thank you!