homedecorcreation 
Nowadays, there are so many products of recirculating pump hot water 3 speed in the market and you are wondering to choose a best one. You have searched for recirculating pump hot water 3 speed in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings recirculating pump hot water 3 speed which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
17,741 Reviews Scanned
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
EXTRAUP 3/4 NPT 110V Hot Water 3-Speed Cast Iron Circulation Pump Circulator Pump
- Power: 100/67/46W,Volt/Freq: 110-120v/60Hz.
- Outlet: 3/4″In,Max Head: 6.0m,Max Flow: 30L/min,Liquid temperature range: 0℉ -+212℉
- Pump housing: Aluminium
- Impeller: PP
- Motor wire: Copper
- Shaft: Ceramic
- Bearing: China.
- No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.
FEATURES:
1.Rated Power(W):100/67/46
2.Voltage/Frequency/110-120v/60HZ
3.Inlet/Outlet:3/4″
4.Max Flow: 30L/min
5.Max Head: 6.0m
6.Pump housing: Aluminum
7.Impeller: PP
8.Motor wire: Copper
9.Shaft: Ceramic
10.Bearing: China
11.Liquid temperature range: 0℉ -+212℉
Application:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.
PACKAGE CONTENT:
1x circulation pump
2x copper connector; 2x copper nut; 2x rubber gasket
1x user manual
Happybuy RS15-9 Hot Water Recirculating Pump 110V Circulation Pump 1-Inch NPT 3-speed Recirculation Pump 8 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features 1×3/4 inch (25.4×19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 100 W. Max pressure: 145 psi (10 bar)，Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.The hot water circulation pump features an automatic switch, which allows the pump to work in manual or autonomous mode.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
BOKYWOX 110V 93W NPT3/4” 3-Speed Food Grade Home Recirculating Pump Hot Water Circulator Circulation Pump （RS15/6G）
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.
Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.
Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.
Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.
Similar items with 4 stars and above
BACOENG 115V Flanged 3-Speed Recirculating Pump, Hot Water Circulation Pump for Water Heater System
- Hot or cold water circulation, up to 20 feet head, 15 GPM, 3-speed switchable
- 2 pole, single phase, 115 volt motor, switchable at 93/67/46 watts, low electricity usage.
- Cast iron body with 3 feet power cord plug
- Flanges interfaces are easy for your maintenance and replacement(Flange set not included).
- Multi-applications on residential and commercial hydronic radiant heating and plumbing
Performance Data:
1.Model:DN20-6F
2.Rated Power(W): 93/67/46
3.Inlet/Outlet: Flange (20mm)
4.Max Flow: 15/10/6(gpm); 55/38/22(I/m)
5.Max Head: 20/17/10(ft); 6/5/3(M)
6.Voltage/Frequency:110V/60HZ
7.Materials:Pump housing: stainless steel
Impeller: Corrosion-resistant, Composite, PES
Shaft: Ceramic
Bearing: Carbon axial
8.Motor Feature:Single phase,Closed, externally ventilated
Heavy Duty Motor housing (Won’t get overheat even continuous running)
Insulation class: F
Protection class: IP44
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Advantages:
1).High temperature resistance, anti-fraying,high efficiency, high flow,leak-tightness, low consumption
2).Super silent, environmental protection, aesthetics, ease of installation.
3).No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
4).Built-in high sensitive electronic sensors with three-speed control.
Specification
1).Suitable for Medium: hot water and ethanol maximum ratio of 1:1
2).Performance: Liquid temperature range:0 – 110 Celsius,Maximum working pressure:10bar
3).Ambient Temperature: Not higher than 40 Celsius.
4).Mounting Position: Shaft horizontal mounting.
5).Pump Settings: single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 170 mm.
6).Material: cast iron, PP, ceramics.
7). Mounting position: Shaft horizontal mounting.
8). Pump settings: single-phase pipeline pump 3-speed controlled single-phase motor is not overloaded casting pump length 170 mm
BOKYWOX 110-120V 3/4”,3-Speed Food Grade Domestic Circulation Pump Hot Water Circulator Circulating Pump (RS15-6SG)
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
Similar items with 4 stars and above
BACOENG 3/4” 110V RS15/6G 3-Speed Control Hot Water Circulation Pump/Circulating Pump With US Plug and Flow Switch
- 1. Smart Flow Switch automatically turns the pump off when no water in pipe such as turning off the tap & will automatically turn back on when you turn the tap back on.
- 2. Rated Power: 93(III)/67(II)/46(I) Max Head: 30FT. Inlet/Outlet:3/4” Voltage/Frequency:115V/60HZ Liquid temperature range: 32 – 230℉
- 3. Work Mode: Set by Switch Button– II(AUTO): Flow Switch Works
- I(MANUAL): Flow Switch Off, pump keeps running.
- 4. Built-in high sensitive electronic sensors with three-speed control. High temperature resistance. Super silent, environment friendly.
- 5.Flexible and Durable: External Switch can be Removed or Replaced. Pump housing: Stainless Steel
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
BACOENG 3/4” 110V/115V Hot Water Circulation Pump/Circulator Pump For Solar Heater System With US Plug
- Flexible Application – Directly Used in Floor Heating System and Hot Water Recirculating System. Also a Wise Choice for DIY: Add a timer to be more energy saving. Add a bridge valve to be used in no return pipe system.
- SMART Connector: 5.5 Ounces Lead-Free Brass Fitting. Smart Design Shortens the setup or disassembly time to within 10 seconds. 1/2″ Deep Thread prevent the Tube from leaking.
- FEATURES: Built-in high sensitive electronic sensors with three-speed control. High temperature resistance. Super silent, environment friendly.
- Material: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- Rated Power:93/67/46W Inlet/Outlet:3/4” Voltage/Frequency:115V/60HZ Installation length:5.1inches Liquid temperature range:32 – 230℉
Happybuy Hot Water Recirculating Pump 110V 248W Circulation Pump 1.5-Inch NPT 3-speed Recirculation Pump 45 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump is designed for solar heater system. Voltage/Frequency: 115V, 60Hz. Rated power: 150/200/248 W. Max pressure: 145 psi (10 bar). Max flow: 170 l/min (45 GPM). Max head: 8m (24 ft). Horse Power: 1/6 HP. Inlet/Outlet: 3.81 cm (1.5 inch),Pump housing: Cast iron. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axial
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Conclusion
By our suggestions above, we hope that you can found recirculating pump hot water 3 speed for you.Please don’t forget to share your experience by comment in this post. Thank you!
