Which Is The Best Rc Water Cooling Esc

ZTW Shark Brushless ESC 70A Waterproof Electronic Speed Controller with 5.5V 5A Switch BEC and Water Cooling System for RC Boat Models Part

Features:

▶ This Shark series of brushless ESC is designed for RC boat.

▶ Super smooth and accurate throttle linearity and throttle response.

▶ 100% waterproof, can be worked well when ESC totally under water.

▶ Built-in switch BEC with a maximum output of 5Amp ad voltage of 5.5V 5A

▶ Compatible with high voltage servos.

▶ Ultra low inner resistance of MOSFET combine with water cooling system keep ESC as cool as possible.

▶ Supports high RPM motors.

▶ Software can be promgrammed simply.

▶ Over temperature protection:  Automaticlly reduce output power while the temperature reach more than 110 ℃, recover power while the temperature is under 100℃.

▶ Electrify safety: The esc itself won’t startup motor ever though radio sticker raised to higher  position while power on, in order to aviod motor spin suddenly.

▶Throttle signal loss protection

▶Low voltage cut off protection

Descriptions:

Model Number 9070101

Continuous Current: 70A

Burst Current(10s):80A

Battery NiXX/Lipo: 5-18NC/2-6Lipo

BEC Output: 5.5V/5A

length: 68mm

Width: 37mm

Height: 18mm

Weight: 112g

User Program: Yes

Waterproof:Yes

Package Includes:

1* 70A RC Boat Brushless Electronic Speed Controller

Hello customer, if you have any issue about this item, please feel free to contact us, we are here for you! Thanks!

Specification: 
Material: PBC
Color: Black
Size: Approx. 7 * 3.8 * 1.6cm / 2.8 * 1.5 * 0.6inch
Cont Current: 60A
Burst Current: 70A
BEC Model: Switch
BEC Output: 5V, 3A
Recommend Battery: Li-ion/Lipoly 2-4S; Ni-Mh/Ni-Cd 6-18NiMh (Not Included)
Cooling: Watercooled
Weight: 54g
Type: RC Part

Package Includes:
1 x ESC
1 x Manual

Note:
 Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep:  cell type and No. of cells;
Music tone + 2 beep:  throttle setting;
Music tone + 3 beep:  brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz

Specification: 
Material: PBC
Color: Black
Size: Approx. 9 * 3.8 * 1.6cm / 3.5 * 1.5 * 0.6inch
Weight: 82g
Cont Current: 80A
Burst Current: 95A
BEC Model: Switch
BEC Output: 5V, 5A
Recommend Battery: Li-ion/Lipoly 2-7S;Ni-Mh/Ni-Cd 6-20NiMh (Not Included)
Cooling: Watercooled
Type: RC Part

Package Includes:
1 x ESC
1 x Manual

Note:
 Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-7S/6-20NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz

Features:
1.4 Pole 12 slot hi-torque motor design.
2.CNC machined 6061 T6 billet aluminum heatsink can.
3.High purity copper windings maximizes efficiency.
4.High RPM ABEC5 oversized bearings.
5.Precision balanced rotor, smoothness for best reliability and maximum RPM.
6.Stator-super thin (0.2mm) laminations.
7.Removable/replaceable rotor.
8.Precision engineered for maximum energy conversion.
Descriptions:
1.The 3660 4 poles sensorless brushless motor is designed to provide both quality and performance.
2.It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for 600-800mm RC boat.
Specifications:
Type: RC Model Part & Acces
Motor:
Motor: 3660
KV(RPM/Volt): 3500KV
Motor diameter: 36mm
Motor length: 60mm
Motor shaft diameter: 5mm
Motor shaft length: 18mm
Motor front cover fixing screw hole center distance: M3 screw 25mm three pairs
Motor outlet length: 8cm with 4mm banana head
Motor maximum power: 1700w
Peak current: 3500kv is 106 A, 2100kv is 70A
The maximum voltage: 3500kv is 16v, 2100kv is 26v
ESC:
Item Name: 70A Brushless ESC with 5.5V/3A BEC
Cont. Current: 70A
Burst Current: 90A (10s)
Voltage: 5-18 NC/2-6 LiPo
Program: Yes
BEC: 5.5V/3A
Item Size: Approx. 80x50x23mm/3.15×1.97×0.91inch
Water Cooling Jacket:
Item Name: 36-S Water Cooling Jacket
Material: Aluminum
Color: Black
Outlet Fitting Diameter: Approx. 4.5mm/0.18inch
Jacket Inner Diameter: Approx. 36mm/1.40inch
Outer Diameter: Approx. 44mm/1.72inch
Jacket Length: 47mm/1.83inch
Package Informations:
Package Size: 188x110x70mm/7.33×4.29×2.73in
Package Weight: 420g/14.7oz
General Box Package
Package Included:
1 x Motor
1 x Water Cooling Jacket
1 x 70A Brushless ESC with 5.5V/3A BEC
2 x Water Cooling Tube
2 x Rubber Rings

Specification: 
Color: Shown As Pictures
Weight: 356g
Type: RC Model Part & Acces
Motor Specification:
Model: 2958
Item Name: Brushless Motor
Material: Metal + Magnet
KV(RPM/Volt): 3380KV
RPM: 60000
Watt: 1400W
No Load Current: 1.9A
Max Voltage: 18V
Diameter: Approx. 29mm / 1.14inch
Length: Approx. 58mm / 2.28inch
Shaft Diameter: Approx. 3.175mm / 0.13inch
Fit: for 600-800mm RC Boat
Connector: 4mm Golden Banana Connector
ESC Specification:
Brand: ROCKET
Item Name: 70A Brushless ESC with 5.5V/3A BEC
Cont. Current: 70A
Burst Current: 90A (10s)
Voltage: 5-18 NC / 2-6 LiPo
Program: Yes
BEC: 5.5V/3A
Item Size: Approx. 80 * 50 * 23mm / 3.15 * 1.97 * 0.91inch
Water Cooling Jacket Specifications:
Item Name: 29-S Water Cooling Jacket
Material: Aluminum
Color: Black
Designed for: 2958 2948 RC Boat Brushless Motor
Outlet Fitting Diameter: Approx. 4.5mm / 0.18inch
Jacket Inner Diameter: Approx. 29mm / 1.14inch
Outer Diameter: Approx. 37mm / 1.46inch
Jacket Length: 47mm / 1.85inch

Package List:
1 * Motor
1 * Water Cooling Jacket
1 * 70A Brushless ESC with 5.5V/3A BEC
2 * Water Cooling Tube

Specification: 
Material: PBC
Color: Black
Size: Approx. 7 * 3.8 * 1.6cm / 2.8 * 1.5 * 0.6inch
Cont Current: 60A
Burst Current: 70A
BEC Model: Switch
BEC Output: 5V, 3A
Recommend Battery: Li-ion/Lipoly 2-4S; Ni-Mh/Ni-Cd 6-18NiMh (Not Included)
Cooling: Watercooled
Weight: 54g
Type: RC Part

Package Includes:
1 x ESC
1 x Manual

Note:
 Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep:  cell type and No. of cells;
Music tone + 2 beep:  throttle setting;
Music tone + 3 beep:  brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz

This RC boat Motor + ESC combo includes: 1pc 3536-1700KV water cooled motor with accessories (adjustable motor mount: 1; 4.0mm to 3.17mm coupler: 1; 0.5m silicone tube: 2), 1pc HK-B125A RC boat 125A waterproof ESC.

The motor and ESC are pre-installed with 3.5mm connectors, we offer two types of ESC power lead connectors: XT60 and T connector, please choose accordingly.

Motor Specifications:
Motor Diameter: 35 mm
Length: 45 mm
Shaft Diameter: 4.0 mm
Weight: 138 g
KV: 1700 rpm/V
Voltage: 2 – 4 S
 
ESC Specifications:
Weight: 110 g
Dimension: 90*41*18 mm 
Voltage: 2-7S Lipo
Continuous Current: 125 A
Burst Current: 150 A
BEC Output: 5V/5A
Two-way ESC with brake function.
 

These series of water cooling ESC designed for RC boat. They are not only offer excellent performance they are also built with the highest quality components to ensure true-to-rating current handling and high efficiency operation.

Phrases 1 Enter programming Mode:
1.Connect your motor and receiver to the speed controller, but do not connect the battery yet.
2.turn on your transmitter and move the throttle stick to the full throttle position (full up).please note: most futaba transmitter have the throttle channel reversed by default.
3.Connect you battery and controller will initialize with a musical tone.

Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones a musical tone followed by one or more beeps. Each sequence represents a parameter that you can program and is repeats 3 times.
The parameters are:
Music tone + 1 beep: Optionas 1. Cell type and No. of Cells;
Music tone + 2 beep: Optionas 1. Throttle setting;
Music tone + 3 beep: Optionas 1. Brake setting/Throttletype(for Heli);
Music tone + 4 beep: Optionas 1. Direction and Cutoff Type;
Music tone + 5 beep: Optionas 1. Timing mode;

User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Count: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz

Specifications:
Cont current: 60A
Burst current: 70A
BEC model: Linear
BEC output: 5V/3A
Recommend battery: Li-ion/Lipoly 2-4S;Ni-MH/Ni-Cd 6-18NIMH
Cooling: Watercooled
ESC weight: 52g
ESC size: 73mm * 36mm * 15mm
Package size: 10 * 5 * 2cm / 3.9 * 2 * 0.8in
Package weight: 56g / 2oz

Package list:
1 * 60A Brushless Water Cooling Electric Speed Controller ESC

Description:
【WATERPROOF DESIGN】This RC Boat Water Pump is waterproof, and the RC Boat Water Pump also works well in water.
【QUIET OPERATION】The low noise design of the 370 Water Pump provides you with perfect playing experience.JR plug is suitable for pluging in receiver.
【THERMAL OVERLOAD PROTECTION】Thermal overload protection automatically, hot but it’s in the normal range, which has no impact on future operation.
【WIDE APPLICATION】Suitable for remote control boat whose motor or ESC needs water cooling.Self-priming allows it to be mounted above tank.
【WARRANTY】We offer a 180-day return service for free. If you are not satisfied with any of the product, please contact us as soon as possible, we will solve all problems for you.

Features: 
It is waterproof, and it also works well in water. JR plug is suitable for pluging in receiver. Under the condition of 5V voltage, the water pump still works normally without interruption after 15 hours operation. It’s hot but it’s in the normal range, which has no impact on future operation. Low noise design provides you with perfect playing experience. Suitable for remote control boat whose motor or ESC needs water cooling.
Specification: 
Material: Metal
Color: Shown As Pictures
Pump Length: Approx. 73mm / 2.9inch
Weight: 68g
Type: RC Pump
Rated Voltage: 6V
Opetation Voltage: 3 – 6V
@3V Volume Flow of Air: 1.1L/min
@3V Flow of Water: 300ml/min
@6V Volume Flow of Air: 1.8L/min
@6V Flow of Water: 600ml/min

Package Includes:
1 x RC Water Cooling Pump

Conclusion

By our suggestions above, we hope that you can found rc water cooling esc for you.Please don’t forget to share your experience by comment in this post. Thank you!