Best Radiant Floor Electric Water Heating Boiler

The heat pro-performer AHS18-D is built for applications with more than 1 bathroom in the southern States where the incoming water temperatures no lower than 65 degree F and can be used for 1-1/2 bathroom in the colder climates where the incoming water temperature is above 45 degree F. Because the heat pro-performer continuously monitors all real time data collected 60 times a second through a range of sensors. It automatically adjusts to any application you may have, for example floor heating, multiple units in series and recirculation configurations. The heat pro-performer boasts a 3/4 in. Inlet and outlet which makes it a breeze for high flow applications. Using astm 304 stainless steel enclosure and heat exchangers ensures long lasting performance with no sediment build up or rust.

90sqft Electric Floor Heating Mat Kit with Thermostat & Alarmer Set

Application

New construction and retrofits;

Residential homes and apartment buildings;

Bathrooms, Kitchens, Saunas, Mud Rooms;

Ceramic or Porcelain Tile, Stone, Granite and Marble Floors;

Laminate, Engineered Wood, Vinyl Floors and many others.

Feature

Equip with settable thermostat and alarmer.

Premium floor heating mat, 90sq.ft size.

Quick & easier to install with self-adhesive mesh surface.

Compatible with floor types: tile, stone, marble, granite, laminate, wood floors etc.

Processed with PEP insulation+aluminum cable ground connection+PVC protective cover to ensure safe use.

Perfect for home & commercial use, like: living room, hotel.

Pass UL, CE, VDE, RoHS tests.

Thermostat Features

1. Display time(H/M/S/W), room temperature(℉), room humidity, floor heating temperature, lock.

2. Mode: Manual Control; Preset Function(User can set 6 working period and corresponding temperature everyday, then thermostat will work according to the set).

3. Settable time: H/M/S and week.

4. Over & Low temperature protection.

5. Equip with accurate sensor.

Floor Heating Mat Parameters

Power Supply: 100-120V

Power Output: 12w/sq.ft

Min. Bending Radius: 30mm

Min. Cable Spacing: 8cm

Max. Exposure Temperature: 90℃

Min. Install Temperature: 5℃

Cold Lead Cable: 16-20AWG

Digital Thermostat Parameters

Power Supply: 100-240V

Load Current: GA: 2A; GB: 16A

Power Consumption: ＜1.5W

Set Point Range: 5-35℃

Package List

1 X 90sq.ft Floor Heating Mat

1 X Settable Thermostat

1 X Alarmer

1 X User Manual

Product Details
Model: RS15-6
Rated Power: 93/67/46W 
Outlet: 3/4 inch 
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz

Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on

Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control

Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, multiple applications with a maximum flow rate of 1 gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. At 72°F inlet temperature the ECO POU 6 can heat 1 gallon per minute to 105°F. It can also heat one hand sink emitting 0.5 gpm to 105°F with inlet temperature as low as 42°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 6 requires a minimum 100 amp electrical panel for installation with (1) 40 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Conclusion

By our suggestions above, we hope that you can found radiant floor electric water heating boiler for you.Please don’t forget to share your experience by comment in this post. Thank you!