![The 10 Best Pentek High Temp Water Filter Housing](https://images-na.ssl-images-amazon.com/images/I/71J1dLnlpfL._SL1200_.jpg)
The 10 Best Pentek High Temp Water Filter Housing
Nowadays, there are so many products of pentek high temp water filter housing in the market and you are wondering to choose a best one. You have searched for pentek high temp water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek high temp water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
25,827 Reviews Scanned
KleenWater Hot Water Filter (1), Mounting Bracket (1), High Temp Cartridges, 5 Micron (3), Spare O-ring (1), Filter Wrench (1)
- Includes filter housing
- 3 polypropylene cartridges
- spare o ring
- wrench
- mounting bracket
- Ideal for commercial or residential hot water filtration and outdoor wood burning furnances
- Compatible with domestic hot water systems
- Maximum temperature 176 degrees F – 3.4″ NTP female connection ports
- Sediment filter cartridges rated at 5 microns – Made in the USA
10 Inch Hot Water Filter High Temperature Housing PWFHHW2510 by Kem Flow
WATTS-HD4500HT34
Pentek 150233, Big Blue, 1" In/Out, #20 Blue/Black, HFPP, w/ PR
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 20” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150233 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
Filter cartridge size (H x W) (sold separately) | 20 x 4-1/2 inches (508 x 114 mm) |
Initial pressure drop at 15 gpm | 1 psi |
Maximum temperature | 100 degrees F (37.8 degrees C) |
Maximum pressure | 90 psi |
Maximum dimensions (H x W) | 23-3/8 x 7-1/4 inches (594 x 184 mm) |
Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
- Reduces chlorine taste and odor in drinking water
- Granular activated carbon (GAC) media with spun polypropylene core and polypropylene end caps for strength
- Porous polyethylene 70-micron outer shell reduces carbon fines and other particles
- Initial pressure drop of 0.90 psi at a flow rate of 4 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
Initial pressure drop at 15 gpm | 1 psi |
Maximum temperature | 100 degrees F (37.8 degrees C) |
Maximum pressure | 100 psi |
Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 1" Threaded 20" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150233 150061 144368)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includs :
✪ Genuine Pentek 1″ #20 Big Blue filter housing (Pentek # 150233) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 144368)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►1” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 20” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 90 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
KleenWater Hot Water Filter (1), Mounting Bracket (1), 5 Micron High Temp Cartridges (3) with Scale Inhibitor, Spare Oring (1), Filter Wrench (1), Multi-Pack
- High temp hot water filtration system by KleenWater
- Compatible with domestic hot water systems
- Includes filter housing
- 3 polypropelene cartridges
- spare oring
- wrench
- mounting bracket
- Ideal for commercial or residential dish washer filtration and outdoor wood burning furnances
- Dirt, rust and sediment filtration with scale prevention
This convenient 7 piece high temperature filtration system by KleenWater includes:
Quantity (1) high temperature housing with 3/4″ female NPT inlet / outlet (Made in Italy)
Quantity (3) polypropelene 5 micron high temperature cartridges with scale inhibitor (Made in America)
Quantity (1) mounting bracket with hardware
Quantity (1) spanner wrench to make cartridge change quick and easy
Quantity (1) KleenWater brand spare o-ring (part# RG2K3W7) to prevent an urgent situation
The KleenWater brand KWHW2510 is made in Italy of reinforced polyamide. It is rated for maximum temperature or 176 degrees F. The inlet / outlet is 3/4″ FPT. A pressure relief valve allows easy cartridge change. The kit is provides tremendous convenience and facilitates a quick and easy installation. The water filter dimensions are approximately 5″(W) X 12″(L) and accept industry standard 2.5″(W) X 9.75″(L) cartridges. Our KW2510SWHT cartridge is made in the USA of 100% FDA compliant polypropylene. The graded density design provides 3 layers of filtration. Larger particles are trapped at the surface and progressively the cartridge allows for finer particle entrapment. Ultimately capable of 5 micron filtration near the cartridge core. To provide perspective to the 5 micron sediment entrapment rating, it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The grooved surface substantially increases the filter cartridge surface area thus it lasts significantly longer. The 7 gallon per minute flow rates allow for residential and light commercial applications. It is recommended the cartridge be changed every 3-6 months or upon substantial pressure reduction.
Please enter model # KW2510SWHT(3) in the Amazon search bar to re-order high temperature sediment cartridges.
(Package Of 12) Pentek 150015-3/4" #10 High Temperature Water Filter Housing
Pentek #10 Red Hot High Temp Filter Housing 3/4" Glass Reinforced Nylon handles temp to 160F (Package Of 12) Pentek 150015 – 3/4″ #10 High Temperature Water Filter Housing
Bag Filter Housing, Poly, 1 In, Bag Sz 410
Filter Housing, 3/4 In NPT, 1 Cartridge
- Price For: Each Includes: Cap, Sump And O-Ring Cartridges Required: 1 Item: Filter Housing Max. Temp. (F): 125 Housing Material: Polypropylene Head Material: Polypropylene Standards: NSF 42 Size: 3/4″ NPT Height (In.): 12-1/4 Dia. (In.): 5-1/8 Max. Pressure (PSI): 125 Color: Blue Type: Single Cartridge Length (In.): 12-1/4 Inputs/Outputs: 3/4″ NPT
- Width (In.): 5-1/8 Country of Origin (subject to change): Unknown
‘ Filter Housing, Height 12 1/4 In., Width 5 1/8 In., Dia. 5 1/8 In., Length 12 1/4 In., Max. Pressure 125 PSI, Max. Temp. 125 F, Housing Material Polypropylene, Head Material Polypropylene, Cartridges Required 1, For Use With 2 3/4×9 3/4 Cartridges, Color Blue, Includes Cap, Sump And O-Ring, Standards NSF 42 ‘
Conclusion
By our suggestions above, we hope that you can found pentek high temp water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!