Best Marathon Hot Water Heater

Product Description

The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.

From the Manufacturer

The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.

Product description

Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack

From the Manufacturer

Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.

Element Wrench – Dual (Fits 1-1/2 in. & 1-7/8 in. Hex)

Product Description

Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel

From the Manufacturer

Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.

Product Description

The Eastman 45058 Water Heater Element Wrench is made of high-impact heavy-duty steel which gives strength. The steel has a chrome finish which gives a modern look to the heater element socket also providing durability making it extremely long-lasting. The kit also includes 3/4 inch to 1/2 inch drive adapter.

USE :This water heater element socket is a must for every household as it lets you replace and install screw-in water heater elements quickly and easily without any hassle. It can be fitted on almost all standard screw-in elements. A modern design with efficient quality.

From the Manufacturer

Eastman’s Heavy-Duty Water Heater Element Wrench helps remove and replace residential screw-in water heater elements quickly and easily. Made of chrome plated steel for durability and strength. Includes a 3/4″ to 1/2″ drive adapter.

Our 4 Panel Hybrid Solar Water Heating Kit allows you to install your 4 panel solar water heater system in record time. Based on our new and improved SW-38 Solar Water Heater panels, you simply thread the panels together.
No more external connection pipes for multi panel installations! Each panel weighs slightly over 12 lbs. and is 24" by 24" but can still provide you with ample hot water. With this kit you DO NOT have to solder at all!
Please Note: This System will not work with Marathon non metallic water heaters and is NOT freeze protected. If you experience freezes you either have to drain the system
or consider our GS and GH type Solar Water Heating Systems.

Each kit comes with:

4 SW-38 Panels
All fittings, Adapters, and Connectors, Wire
1 TopsFlo TD5 Stainless Steel Pump
1 Bottom Feed Connector to connect directly to your existing water heater
1 10W PV panel to power the pump – NO grid connection required
Installation Intructions

All You have to supply is:

Your choice of 1/2" Pipe from the panels to the water heater(Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

From the Manufacturer

Rheem Thermostat – Electric

Conclusion

By our suggestions above, we hope that you can found marathon hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!