The 10 Best Laing Hot Water Pump

Product Description

The auto circ pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the autocirc pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The autocirc pump turns off automatically when the hot water supply line to the faucet reaches a temperature of 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line. Another beneficial feature is that hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the autocirc pump is installed. Does not require a return line. Requires only 14 watts of power. Packaged complete with a 6 ft. long power cord. Requires only one pump and one installation for all fixtures on the hot water plumbing line. Has built-in fixed thermostat. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Saves the average family of four up to 17,000 gallons of water annually.. Long lasting, silent operation. Saves energy, money, water and pays for itself in a short period of time (see additional images for energy saving chart). No shaft, no seal. Maintenance free without blockage. Single bearing design. Resistant to scale build up.

From the Manufacturer

The Laing Pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 77º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Laing pump turns off automatically when the hot water supply line to the faucet reaches 91º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.The product should be installed by a licensed professional.

Product Description

Act E10 Undersink Hot Water Recirculation Pump .The industry’s first retrofit hot water recirculation pump designed specifically for tankless water heater applications, just got better with high efficiency ECM technology. ACT E10 lead-free pump was designed with high efficient electronically commutated permanent magnet motor (ECM/PM technology) specifically for potable water systems. This unique design is perfect for retrofits, no recirculation pipe required, and systems with tankless water heaters. GPM given is max.

From the Manufacturer

Act E10 Undersink Hot Water Recirculation Pump .The industry’s first retrofit hot water recirculation pump designed specifically for tankless water heater applications, just got better with high efficiency ECM technology. ACT E10 lead-free pump was designed with high efficient electronically commutated permanent magnet motor (ECM/PM technology) specifically for potable water systems. This unique design is perfect for retrofits, no recirculation pipe required, and systems with tankless water heaters. GPM given is max.

Product Description

The Laing UC-303-BW Ultra-Circ Circulator Pump design incorporates a ball valve on the inlet side of the pump, a spring check valve on the discharge side of the pump and 1/2″” sweat union connections. The compact design saves space, the cost associated with purchasing the additional fittings and is also a huge labor-saving product for the contractor/plumber. The UltraCirc™ feature is available on the SM-303 and SMT-303 series pumps. The SM-909 series pumps are available for larger plumbing circuits. Max 4 GPM @ 4′ head.

From the Manufacturer

The Laing UC-303-BW Ultra-Circ Circulator Pump design incorporates a ball valve on the inlet side of the pump, a spring check valve on the discharge side of the pump and 1/2″” sweat union connections. The compact design saves space, the cost associated with purchasing the additional fittings and is also a huge labor-saving product for the contractor/plumber. The UltraCirc™ feature is available on the SM-303 and SMT-303 series pumps. The SM-909 series pumps are available for larger plumbing circuits. Max 4 GPM @ 4′ head.

From the Manufacturer

Low flow provides minimal flow velocities thereby reducing the effect of pipe erosion and noise caused by vibration. Old part # SM-303-BSW

From the Manufacturer

The Laing Pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. >A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 77º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Laing pump turns off automatically when the hot water supply line to the faucet reaches 91º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.

From the Manufacturer

Low flow provides minimal flow velocities thereby reducing the effect of pipe erosion and noise caused by vibration. Old part # SM-303-BTW

Product Description

Provide Instant Hot Water to the ENTIRE HOUSE when and where you need it! Thanks to the high efficiency ECM technology; the ACT-4 hot water recirculation kit only uses 20 watts of power and delivers INSTANT COMFORT Saves on time and money, No recirculation line required No electric outlet needed under the sink No more wasted water, saves 12,000 gallons of water per year Pump installed at the hot water source Electronically paired mixing valve installed under the sink farthest away from the hot water source Temperature and timer controlled Wireless communication between pump and valve.

From the Manufacturer

Provide Instant Hot Water to the ENTIRE HOUSE when and where you need it! Thanks to the high efficiency ECM technology; the ACT-4 hot water recirculation kit only uses 20 watts of power and delivers INSTANT COMFORT. Saves on time and money, No recirculation line required. No electric outlet needed under the sink. No more wasted water, saves 12,000 gallons of water per year. Pump installed at the hot water source. Electronically paired mixing valve installed under the sink farthest away from the hot water source. Temperature and timer controlled. Wireless communication between pump and valve.

‘Hot Water Circulator Pump, Pump Type Fixed Thermostat with Timer, Series E1, HP 1/150, Voltage 115, 1 Phase, Inlet/Outlet Size 1/2 In., Connection Style NPT, Face to Face Dimension 4-13/32 In., Housing Material Lead Free Brass Volute, Drive Type AC Magnetically Driven Spherical Motor, Height 8 In., Length 8 In., Width 4-1/2 In., Loop Configuration Open, Flange/Union Included No, Includes 6 ft. Power Cord’

Laing E3 series hot water recirculation pump (no timer). LHB08100095. 1/2 inch thread connection. 6 foot power cord included.

Conclusion

By our suggestions above, we hope that you can found laing hot water pump for you.Please don’t forget to share your experience by comment in this post. Thank you!