Which Is The Best Ispring Water Filter Replacement

The F7-GAC 1-year filter pack comes with a total of 7 replacement filters so the filters can be changed on schedule for 1 year.

2x 5 Micron 10″ Sediment Filters (1st Stage, #FP15): Removes dirt, rust, sand, and other particles. Replace approximately every 6 months.

2x 5 Micron 10″ Granular Activated Carbon (GAC) Filters (2nd Stage, #FG15): Absorbs chlorine, halide, organic contaminants, odors, and other impurities that contribute to bad tastes and odors. Replace approximately every 6 months.

2x 5 Micron 10″ CTO Carbon Block Filters (3rd Stage, #FC15): Further removes any remaining chlorine, tastes, and odors. Replace approximately every 6 months.

1x Post Carbon Inline Filter (5th Stage, #FT15): Polishes the water from the tank before it is delivered to the faucet. Replace approximately every 12 months.

Note: The 1-year filter supply does not come with an RO membrane, as the membrane only need to be changed every 2-3 years. To get a filter pack that includes the membrane, take a look at the 2-year F15-75 or 3-year F22-75 supply pack.

This filter pack fits the iSpring RCC7, RCC7P, and most other RO systems that use standard sized filter housings including Flowmatic, PuROLine, Crystal Quest, and Apec.

Usually used as the second stage for 20 in. Big Blue whole house filters. The carbon block filter is manufactured using a continuous extrusion process. It consists of a high quality virgin premium performance Activated Carbon. It is effective in reducing free chlorine, bad taste, odor THM, Organics, hazardous chemicals, and pesticides. Depending on the inlet water quality or flow rate, it needs to be replaced every 6 months or 100,000 Gal. of water.

The filter pack F4-CUA4 includes: 1 x 1st stage: 5 micron sediment filter that can effectively remove rust, sand, and solid impurities in the water to protect the delicate UF membrane. Lasts 6 months. 1 x 2nd stage: State-of-the-art UF hollow fiber membrane that uses standard home water pressure to push water through a Semi-Permeable membrane. Suspended particles and materials of high molecular weight, such as bacteria, are unable to pass through the 0. 1 micron UF membrane, leaving you with only fresh clean water and dissolved minerals. Lasts 12 months. 1 x 3rd stage: KDF media (or kinetic degradation fluxion media) with activated carbon. KDF itself is known to kill algae and fungi, control bacteria growth, and remove chlorine, pesticides, organic matter, rust, unpleasant taste and odor, hydrogen sulfide, iron, lead, nickel, chromium, cadmium, calcium, aluminium, mercury, arsenic, and other organic compounds. When used with carbon, KDF can extend the carbon filter life up to 8 times. It also adds a healthy dose of zinc ions to the filter water. Lasts 6 months. 1 x 4th stage: Post activated carbon filter. Adopting fine coconut shell activated carbon with ultra-micron aperture, this carbon filter absorbs residual chlorine, organics, humus, and odor. Lasts 6 months.

What is included: – 2 pieces of 5 micron sediment filters #FP15 – 2 pieces of granular activated carbon (GAC) filters #FG15 – 2 pieces of 5 micron CTO carbon filters #FC15 – 1 piece of post carbon inline filters #Ft15 – 2 piece of alkaline mineral filters #FA15 – 1 piece of 11W UV light bulb #Uvb11 fit models: -RCC7AK-UV -rcc1up-ak -most other 7-stage alkaline UV ro systems

Product Description

2 of Melt-blown Polypropylene Sediment filters – 20″ Big Blue Sediment filter is often the first filter installed in the Whole House Water Filter. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters.

From the Manufacturer

2 of Melt-blown Polypropylene Sediment filters – 20″ Big Blue Sediment filter is often the first filter installed in the Whole House Water Filter. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters.

Specifications & Dimensions

– Capacity: 75 gallons per day @ 50/60 psi & 77 degree F – Feed water pressure: 40 – 100 PSI – Feed water Temperature: 40 – 100(F) – Max. Total Dissolved Solids (TDS): 2000 ppm – Max. Hardness: 10 gpg – Max. Iron 0.2ppm – pH limits: 4 – 10 – Length: 10″, O.D. = 1.8″ – 1/4″ Fitting – Weight: 0.8 LBS

Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second stage of the WGB32BM houses a 5-micron CTO coconut shell carbon block filter. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes up to 95% of chlorine from the water, and is highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. The third stage of the F3WGB32BM has an iron and manganese reducing filter – also great for the plethora of heavy metals found in well water sources.

Conclusion

By our suggestions above, we hope that you can found ispring water filter replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!