Which Is The Best Inline Temperature Sensor Computer Cooling

This temperature sensor is equipped with a G1/4″ inner- and a G1/4″ outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection.

Model: 53067

The new temperature sensor from Phobya with g1/4″ inner thread and G1/4″ outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it’s low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.

Model: 71227

XSPC G1/4″ plug with built in temperature sensor

Model: 5060175584168

Includes LCD display and temperature sensor wire

Model: 5060175589910

The sensor can be connected to the XSPC V2 LCD temperature sensors with 2pin connection on the back.

Model: 5060175584175

In-line filter for PC watercooling application.

Model: BP-ILF-TB

Inline filter with replaceable stainless steel mesh. Supplied with replacement mesh filter and two replacement o-rings.

Model: 5060596650343

This temperature sensor is equipped with G1/4″ inner threads on both sides to allow maximum flexibility. The temperature sensor can therefore be equipped with most fittings on the market, allowing the use with almost any hose size. The sensor connection cable has a length of 60cm and a 2-Pin connector.

Model: 53066

2-Pin thermal sensor compatible with Lamptron controllers

Model: LAMP-THERMSEN

All metal inline coolant filter for keeping accidental debris from damaging the pump or clogging other components. It includes two reusable stainless steel filters with hole sizes of 0.42mm/sq and 0.27mm/sq.

G 1/4 BSPP sockets are provided on both sides, with one male and one female for easy installation into the inlet of a water block, pump, or heat exchanger. Nickel-plated brass and stainless steel mesh filters. The filter body can be unscrewed for cleaning or replacement.

Additional Specifications

• Materials: Nickel-Plated Brass, Stainless Steel, EPDM
• Max Temperature: 70°C (158°F)
• Max Pressure @ 25°C: 5kgf/cm2 (71.1psi)

Conclusion

By our suggestions above, we hope that you can found inline temperature sensor computer cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!