Best Ice Maker Booster Pumps

This listing does not come with pressure switch, which need to be purchased separately if you want to auto-shut-off the pump. This listing is for a boost pump for water supply to a Reverse Osmosis water system. It is to increase the water supply pressure from 40 psi to 60 psi for RO systems that is 75GPD or smaller. Larger capacity RO should use 8852 pump instead. Also this pump is NOT for output boosting, or line boosting. If you want to increase output pressure of a RO system to ice maker or refrigerator, use 5851 pump instead. If you don’t know what you need. Please ask before you buy. Please do not use this pump for misting applications because it is too small. For misting, use other model 8852 pumps

This is a demand delivery pump used normally after an RO storage tank

If your water supply is from a well or the water supply pressure is below 50 psi, then it is recommended that you add this pump kit to your RO system setup to increase the water supply pressure to 60 to 80 psi range to optimize the performance of your RO system. PLEASE MAKE SURE your RO system is in working condition, and it can make water and turn on/off correctly. If your RO system is not working correctly or not making water, then you need to fix the RO system and replace filters. This pump is not able to fix a non-working RO system. Quiet operation, 1 year factory warranty. Made in USA pump and pressure switch

Product Description

Product Description:

Specification:

• Country of Manufacture: United States
• Product Type: Pump
• Color/Finish: Black
• Compatible Appliance Type: Water Cooler/Dispenser
• Product Dimension: 5 x 6.3 x 6.3 inches
• Warranty: 1 Year

Give it a boost, with the Watts Premier water filtration booster pump kit. This kit increases the efficiency and for all water filtering systems – especially where it may be needed most: in low water pressure applications. A Booster Pump for Reverse Osmosis Units, designed for use in areas with water pressure lower than 40 PSI. This pump is quiet, easy to install, and will significantly increase water output.

From the Manufacturer

Designed to work with all RO water filtration systems. Will increase the efficiency and flow for all water filtration systems, especially in low water pressure applications.

If your water supply is from a well or the water supply pressure is below 50 psi, then it is recommended that you add this pump kit to your RO system setup to increase the water supply pressure to 60 to 80 psi range to optimize the performance of your RO system. PLEASE MAKE SURE your RO system is in working condition, and it can make water and turn on/off correctly. If your RO system is not working correctly or not making water, then you need to fix the RO system and replace filters. This pump is not able to fix a non-working RO system. Quiet operation, 1 year factory warranty. Made in USA pump and pressure switch.

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

Reverse osmosis booster pumps are used to increase the pressure going into your RO or RO/DI system which make it operate more efficiently and can decrease consumption of DI resin. Designed as an accessory for Reverse Osmosis units in areas with low water pressure, or for users that want maximum output and the best quality filtered water from their RO systems. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure–down to 35 psi–but the reality is you won’t get a lot of water and the product water quality may be compromised if the unit runs below 45 psi. RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher. The increased pressure will also improve the economy of the unit (it will run less reject water) as well as the quality of the water. RO units thrive on pressure! Features: The high pressure switch turns off the booster pump if the filtered water pressure is greater than 33.35 PSI, prolonging the life of the pump. Buddie Fit press-fittings make it easy to plumb tubing into the existing RO system – The sealed pressure pump is low-voltage and powered by the included transformer, which ensures safe, quiet operation. Easily plumb into most reverse osmosis systems to increase water pressure up to 90 PSI and reduce waste water. RO units thrive on pressure – The Smart Buddie Booster Pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated. Flushing clears debris build-up on the membrane, and is critical to obtaining peak performance from the RO unit. After flushing filtered water production will begin – Low pressure switch turns off the booster pump if water pressure is less than 7.25 PSI, extending the life of the pump.

Now Includes Internal Check Valve.

Pressure switch is not included in this listing. Pressure switch need to be purchase separately. Depending on your applications at what cut-off pressure setting. This listing is for pump and transformer only. You can turn on/off manually, or use (optional) pressure switch or (optional) timer to turn on/off the pump. This pump is to increase input pressure to a RO system. This pump is not for increasing pressure to ice maker or refrigerator. That’s different model. For ice maker pump or increasing output pump, please get Aquatec 5851 0.7GPM to 1 GPM pump This is Aquatec Boost pump and transformer for Reverse Osmosis Water systems. The input/output of the pump is 3/8″ quick connect fitting, we also include two reducer fitting to 1/4″ if you have 1/4″ tubing. So this setup will work for both 3/8″ and 1/4″ OD tubing. If you are using this for a RO system you may need to order separately a pressure switch and/or a solenoid valve. If you are buying this pump for misting application. Please note that the pump need to be placed at floor level, the pump need to be lower than the water level. It can self prime but input tubing need to be all the way near the bottom of the container and be tied down/ tether with heavy object so the tubing can stay near the bottom and not floating up. The number of nozzles the pump can support depends on the flow rate of the total nozzles and the pressure you want to achieve. Connect one nozzle first and make sure everything works then add more nozzles and check pressure. With less nozzles the pump is able to high pressure above 80 psi. As you add more nozzles, the pressure decreases. If the pump is not connecting to anything, or just pumping air, then it sounds loud, it will be more quiet when it is connected with water line. The pump need to be placed on the floor level, lower than the water level. Do NOT put the pump on top of the container or above water level if you are drawing water from a container.

Conclusion

By our suggestions above, we hope that you can found ice maker booster pumps for you.Please don’t forget to share your experience by comment in this post. Thank you!