homedecorcreation 
Nowadays, there are so many products of hot water tank heater giant in the market and you are wondering to choose a best one. You have searched for hot water tank heater giant in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water tank heater giant which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
27,096 Reviews Scanned
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
Cash Acme Water Heater Tank Booster Pro, Thermostatic Mixing Valve 3/4″ with Temperature Gauge, Braided Hose, Domestic and Commercial Application
- COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters
- PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures
- SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets
- COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature
- SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing
HOT WATER TANK HEATER INSULATION JACKET DIY ‘PREMIUM’ KIT: ENERGY SAVING REFLECTIVE FOIL FITS 50 & 60 GALLON WATER TANKS. MANUFACTURER OF THIS KIT FOR 27 YEARS. EXCLUSIVELY SOLD BY ‘JR GLOBAL SALES’
American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Camplux ME25 Mini Tank Electric Water Heater 2.5-Gallon,1.5kW at 120 Volts
- 2.5-gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it
- Electric water heater is easy to maintain and has glass-lined tank for long service life
- Thermostat Control allows adjustment of water temperature.High Limit device provide protection while overheating.
- Plugs into 120 volt outlet for independent installation or in-line with a large hot water source.(Max. water pressure is 150 PSI,CSA listed Temperature & Pressure relief valve included)
- Can be shelf, wall or floor mounted
- Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Product dimension:11.75″ W x 17.25″ H x 10.38″ D.
Stiebel Eltron 233219 2.5 gallon, 1300W, 120V SHC 2.5 Mini-Tank Electric Water Heater
Product Description
Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.
From the Manufacturer
The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).
Ariston Andris 4 Gal. 6 Year 120-Volt Corded Point of Use Mini-Tank Electric Water Heater
Thermoflow UT10 2.6-Gallons Electric Mini-Tank Water Heater, 1.5kW at 120 Volts
- ➤ 2.6 GALLON CAPACITY – 2.6 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.Stainless steel tank and heating element designed for efficiency, durability and easy replacement.
- ➤ THERMOSTOP FUNCTION – Low stand-by loss power consumption. The Thermoflow UT10 with Advanced Thermostop Technology of Germany, when the water heater reaches a high or low set temperature,it’ll stop heating or reheating automatically.
- ➤ EPS FOAMING TECHNOLOGY – Heating water quickly,fast recovery rate eliminates long waits for hot water at your sink.
- ➤ SAFETY – Active protection circuit for safe installation. If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase &
- installation. Dimensions: 18H x 12.2W x 11D inches
- Weight: 14 lbs
- Water connections :1/2 inch NPT, Electrical requirements: 1.5 kW, 120 volts. Operating pressure : 150PSI.Nominal current: 13A .
Ecosmart ECO MINI 2.5 2.5-Gallon 120V Electric Mini Tank Water Heater
Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
Conclusion
By our suggestions above, we hope that you can found hot water tank heater giant for you.Please don’t forget to share your experience by comment in this post. Thank you!
