Best Hot Water Stoage Tank

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

Aqua-Tainer 7 gallon (26 liter) rigid water container feature a rectangular design for easy storage and stacking. Great for all outdoor activities and emergency water storage at home.

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

Product Description

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.

From the Manufacturer

The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).

The Stiebel Eltron Tempra 15 Trend Tankless Water Heater will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 14.4 KW/10.8 KW; Min recommended household electric service 100 A; Amperage draw: 2 x 30 A 2 x 26 A; Number and min. recommended size of circuit breakers: 2 x 30 A (DP); Number of runs and min. recommended wire size (copper): 2 x 10/2 AWG; Max. temperature rises: 65 F/49 F at 1.50 GPM, 43 F/37 F at 2.25 GPM, 33 F/25 F at 3.00 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l /min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.

Conclusion

By our suggestions above, we hope that you can found hot water stoage tank for you.Please don’t forget to share your experience by comment in this post. Thank you!