homedecorcreation 
Nowadays, there are so many products of hot water heatet elements in the market and you are wondering to choose a best one. You have searched for hot water heatet elements in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water heatet elements which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
11,961 Reviews Scanned
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
ZERO EWH-01 Electric Water Heater Tune-Up Kit, T-O-D style, Universal for Water Heater
- ZERO EWH-01 Electric Hot Water Heater Repair Kit, T-O-D style,
- Contains (1) TOD Style Upper Thermostat/ZERO KSD203, ASIN: B07CP1H1X6
- Contains (1) TOD Style Lower Thermostat/ZERO KSD200, ASIN: B07CNJNDQY
- Contains (2) Two Heater Elements, 4500w Each, Universal for Water Heaters. 120V ~ 480V
Universal for all type water heater. 120V ~ 480V Contains all the parts needed to repair or renew an electric water heater. Includes 2 each high watt density elements, 1 TOD style lower thermostat with protector #KSD200（https://www.amazon.com/KSD200-Electric-Thermostats-Single-Recognized/dp/B07CNJNDQY/ref=sr_1_16?keywords=AMATACH&qid=1553507108&s=gateway&sr=8-16）, 1 TOD style upper thermostat with protector #KSD203（https://www.amazon.com/KSD203-Heater-Thermostats-Element-Recognized/dp/B07CP1H1X6/ref=sr_1_19?crid=UF8B2F62NY8T&keywords=water+heater+thermostat&qid=1553506518&s=gateway&sprefix=water+heater+th%2Caps%2C325&sr=8-19）.
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
(2 Pack) Water Heater RV Anode Rod – Replacement Suburban 232767 Mor-Flo – 3/4" Thread with PTFE Thread Seal Teflon Tape
- 99.8% Pure High Quality Magnesium anode rod. Better than powered anode rod, camper rod and aluminum rod. Compatible with all models Suburban (D, DE, DEL, DEM models).
- For RV water heaters and camper water heater. Replacement Part Suburban 232767. Large Roll Of Teflon Pipe Thread Sealing Tape Included for you. Size: 9 ¼’’ Length and has ¾’’ NPT Thread. Uses a 1 1/16’’ (27mm) socket (not included)
- Replacing the anode rod in a water heater before it fails can slow down corrosion inside the tank and significantly extend the life of the water heater, sometimes even doubling it. You can get rid of the rotten egg smell with 3 simple steps.
- A magnesium water heater anode rod protects your tank better and last longer. Aluminum/zinc rods are cheaper and are recommended if you have smelly incoming water. But consult a water treatment specialist before switching to an aluminum rod.
- Anode rods should be replaced regularly 6 months to 1 year if you have bad incoming water, keep few spare in your RV just in case while you are camping.
Similar items with 4 stars and above
Reliance Water Heater 100109136 Electric Water Heater Plumber Repair Pack, Includes 1 Each Upper Thermostat.
Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 16.9ounces
Origin: China
Color: White
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
Diximus 10in 1000W-110V Water Heater Portable Electric Immersion Element Boiler Travel
- Portable immersion bucket water heater is simple electric appliance for heating liquids.
- Total length: 10″, Metal sheel length: 7.3″, Metal sheel Diameter: 0.256″
- AC: 110 V, Power 1000 W, 4.9 ft Cable
- New and High Quality water immersion heater, Very Compact heating coil. Heating up water to the right temperature or boil egg, potato, etc.
- Portable electric immersion water heater is Ideal for home, garden, office or travel.
1000W 110V Portable Electric Immersion Water Heater
Portable immersion bucket water heater is simple electric appliance for heating liquids.
Use this lightweight and portable immersion heater for warming liquids (water, coffee, tea, soup and more). Ideal for home, office and travel.
Unlike the electric kettle it has not a vessel for the liquid and needs to be dip in liquid. A tube of portable immersion bucket water heater is used as the heating element in this water boiler.
Portable immersion bucket Water Heater is simple in design and very compact, making it widely distributed.
Specification:
- Product name: immersion water heater
- Voltage: AC 110V
- Power: 1000W
- Material: 201 stainless steel
- Total length: 10″ ((25.4cm)
- Tube length: 7.3″ (18.5cm)
- Outer Diameter: 0.256″ (Ф6.5mm)
- Wire length: , 4.9 ft (1.5m)
Conclusion
By our suggestions above, we hope that you can found hot water heatet elements for you.Please don’t forget to share your experience by comment in this post. Thank you!
