Best Hot Water Heater Tools

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Product Description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

magnesium anode rod for water heater

Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.

Besides, Magnesium ions won’t cause any harm to your skin.

Length: 44 inches/ 1100mm

Diameter: 0.8″ /21mm

3/4″NPT thread

Net Weight of the anode rod: 660g

Material: Magnesium

Application:magnesium anode rod for water heater

Magnesium Anode Rod * 1

1-1/16″ Hex Socket Tool *1

Teflon Sealing Tape * 1 roll

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

V53DeP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

Product Description: The Turbo Tank Cleaner is a unique one of a kind tool that utilizes the power of the pressurized water in your tank to extract and transport massive amounts of sediment buildup from your water heater. This tool is installed through the tanks drain valve hole and a common garden hose is attached to it. The tank is then refilled, the water is left on and is under full pressure. Next, the tool is spun with a drill. An agitator stirs up the sediment at the bottom of the tank. Flowing water sweeps it to the mouth of the tool. An auger busts it up, pulls it inside and prevents plugging up. A grinder then turns it into a fine slurry that is discharged out through the garden hose to a remote disposal area. The Turbo Tank Cleaner has a clear ABS plastic housing to allow the user to view and monitor the cleaning process. It is engineered to clean any type or size water heater with the standard ¾ inch NPT drain valve hole. This tool will quickly remove massive amounts of sediment from your tank, but expect to see small insignificant amounts remaining.

Conclusion

By our suggestions above, we hope that you can found hot water heater tools for you.Please don’t forget to share your experience by comment in this post. Thank you!