Best Hot Water Heater Tankless 4Gpm

The 220V ECO270 unit by Marey provides 27kW of power, being the perfect solution for multiple points of use in the Southern areas of US (up to 3 showers simultaneously in such locations). This unit provides 38°F increase at 6.5 GPM, allowing you to have multiple points of use running simultaneously in hot climates. If you live in colder regions, this unit can reach up to 80°F at 1.5 GPM for hot water output at one point of use at time. Marey´s ECO270 is ETL approved and recommended for the whole US territory. This unit must be installed no more than 40 feet from the intended point of use and it must be installed by a professional as its electrical requirements demand (3) 50 Amp breakers. ECO270 has no need for pre-heating as it provides instant hot water on demand. It is activated by water pressure (5 to 85 PSI) from the moment the faucet is opened. The complete ECO line by Marey is the only one in the market designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

Rheem RTG is a series of mid-efficiency condensing tank less gas water heaters designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of . 26GPM and minimum activation flow rate of . 40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and Eco Net enabled mobile app feature (additional kit available), buying the Rheem RTG tank less water heater makes perfect sense. Included are a digital remote control and 10ft. of thermostat wire. As this unit is for use outdoors no venting is required. Best if used with up to 3 bathrooms; . 82UEF (. 82EF Canada) efficiency.

The 220V ECO180 unit by Marey provides 18kW of power, being the perfect solution for multiple points of use in the southern areas of the US (up to 3 points of use simultaneously in such locations). This unit provides 31°F increase at 4.4 GPM, allowing you to have multiple points of use running simultaneously in hot climates. If you live in colder regions, this unit can reach up to 80°F at 1.5GPM for hot water output at one point of use at time. Marey´s ECO180 is ETL approved and recommended for the whole US territory. This unit must be installed no more than 40 feet from the intended point of use and it must be installed by a professional as its electrical requirements demand (2) 50 Amp breakers. ECO180 has no need for pre-heating as it provides instant hot water on demand. It is activated by water pressure (5 to 85 PSI) from the moment the faucet is opened. The complete ECO line by Marey is the only one in the market with a corrosion resistant patented heating element which reduces hard water build up from chlorine and calcium.

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 2 points of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3.0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1.5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

The Marey ECO150 14.6Kw unit is ideal for up to two simultaneous points of use increasing incoming water temperature up to 41°f at a 2.5Gpm water flow rate. The Marey eco series tankless water heaters are the only ones in the market to include a German-designed, patented heating element with a stainless steel water channel. This high quality component is corrosion resistant and reduces hard water build up from chlorine and calcium.

Product Description

3/4 IPS LEAD FREE ISOLATOR EXP E2 w/LEAD FREE PRESSURE RELIEF VALVE TANKLESS WATER HEATER SERVICE VALVES – HOT & COLD SET – FULL PORT BRASS BALL VALVES w/ADJUSTABLE PACKING GLAND, HI-FLOW HOSE DRAINS (500 WOG) & PRESSURE RELIEF VALVE (150 PSI/200K BTU)

From the Manufacturer

Hot and cold set of full port forged brass ball valves with hi-flow hose drains and pressure relief valve outlet.

• Color : Silver
• Product Size: 17.5 In. X 13.0 In. X 31.0 In.
• Ignition System: Direct Electronic Ignition
• Wi-Fi Ready
• Max Heating Input-Natural Gas (Btu/h &kW): 199,000 BTU/h (58.3 kWh)
• Save energy and reduce utility costs by operating only when hot water is needed
• Energy Factor of.82 / Uniform Energy Factor of.81
• Gas Type: Natural Gas
• Assembly : Assembly Required
• Installation Type: Outdoor Only
• Energy Star Compliant
• Venting Type: ConcentricSpecs:Material Info: Metal

• Venting Type: ConcentricSpecs:Material Info: Metal
• Energy Star Compliant
• Ignition System: Direct Electronic Ignition
• Energy Factor of.82 / Uniform Energy Factor of.81
• Product Size: 17.5 In. X 13.0 In. X 31.0 In.
• Installation Type: Indoor Only
• Assembly : Assembly Required
• Gas Type: Natural Gas
• Save energy and reduce utility costs by operating only when hot water is needed
• Color : Silver
• Max Heating Input-Natural Gas (Btu/h &kW): 199,000 BTU/h (58.3 kWh)
• Wi-Fi Ready

Conclusion

By our suggestions above, we hope that you can found hot water heater tankless 4gpm for you.Please don’t forget to share your experience by comment in this post. Thank you!