Which Is The Best Hot Water Heat Exchanger

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.   Product Data:Finned Area: 16″ x 16″Overall Dimensions: 16-1/4″ x 18″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 16-1/4″ x 21-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:94,689 BTU with 180°F Entering Water Temp., 13 GPM and 1200 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

NEW 9 FT CORD PRE WIRED TO UNIT ALSO A 1 FT ADDITIONAL CORD THESE CORDS ALLOW YOU TO FULLY USE THE 2 SPEED BLOWER FAN. INCLUDES A 110V IN-LINE THERMOSTAT WITH WIRELESS REMOTE CONTROL AND A HARD TO FIND ON OFF ON SWITCH THAT LETS YOU CHANGE FAN SPEED WITH THE PUSH OF A BUTTON. UNLIKE OTHER THERMOSTATS, JUST PLUG INTO WALL SOCKET THEN PLUG THE POWER CORD FROM HEATER TO THE THERMOSTAT. MAKES LIFE SO MUCH EASIER. ALL NEW 2 SPEED BLOWER FAN. THE ONLY ONE WITH 2 SPEEDS OF THIS STYLE EXCLUSIVELY AT FREEHEAT4U. 50,000 BTU hanging air handler with 2 speed fan, REMOTE THEROSTAT AND ON OFF ON SWITCH! This unit has adjustable louvers on the front so you can point the heat in the exact spot you want. This unit comes with pre drilled holes to make your hanging options easier. 1” copper ports make hook up a breeze! Great for garages, warehouses, greenhouses, etc. This is for hydronic heat, so works fantastic with wood boilers! Dimensions: Width = 15 ¾”, Height = 12”, Depth = 13 ½” including fan. Weight = 24 lbs. FIRST FAN SPEED 1310R/MIM. SECOND FAN SPEED 1580R/M. Made of high quality materials for a long life. Comes with a pro-rated LIFETIME warranty in the event the unit freezes. You can contact us at 262-339-0061 or 920-838-1764 with questions, or to talk to our knowledgeable staff.

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 12″ x 18″Overall Dimensions: 12-1/4″ x 20″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 12-1/4″ x 23-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:80,357 BTU with 180°F Entering Water Temp., 10 GPM and 1200 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 24″ x 24″Overall Dimensions: 24-1/4″ x 26″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 24-1/4″ x 29-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:210,256 BTU with 180°F Entering Water Temp., 20 GPM and 3000 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 12″ x 24″Overall Dimensions: 12-1/4″ x 26″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 12-1/4″ x 29-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:94,795 BTU with 180°F Entering Water Temp., 10 GPM and 1200 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

Conclusion

By our suggestions above, we hope that you can found hot water heat exchanger for you.Please don’t forget to share your experience by comment in this post. Thank you!