homedecorcreation 
Nowadays, there are so many products of heating element tape in the market and you are wondering to choose a best one. You have searched for heating element tape in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating element tape which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Snap Supply Bake Element for GE Directly Replaces WB44T10010
- This Bake Element Replaces the following Part #’s: WB44T10010, AP2030996, 770549, AH249285, EA249285, PS249285. *If you do not see your part number contact us
- Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
- Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.
- Installation Instructions available on our website! Make sure you buy from Snap Supply, to get the quality this listing offers. UL Certified
- Compatible with the following Dryer brands: Hotpoint, General Electric
**Don’t buy this part if you do not see your part number listed or have contact us. We will respond within 24 hours to questions posted below** Compatible with the following Brands: General Electric, Hotpoint, RCA, and others. Cross References: 770549, AH249285, EA249285, PS249285, B00SYNJ8CG. Some Suitable Model Numbers: JBP24BB4WH, JBP64BB4WH, JBP64WB4WW, JBP24BB1WH, JBP24WB4WW, JBP24BB2WH, JBP64WB5WW,JBP68HD1WW, JBP67BD1WH, JBP24WB1WW, JBP24BB4AD, JBP24WH2WW, JBP64BB1WH, JB600WD1WW, JBP24BB1CT.
HEATIT JHSF 6-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
Similar items with 4 stars and above
Frost King RC60 60 Feet, 120V, 5 Watts Per Foot, Electric Roof Cable
Frost King roof and gutter cables. Prevents ice build up in gutters and ice dams getting under the shingles. Kit comes complete with cable spacers and shingle clips. Complete installation instructions. Available in lengths from 30′ – 200′.
3 Teflon Heat Tape Strips for Vacuum Sealers Fits FoodSaver, Weston, Seal-A-Meal, Cabelas, and Others (Made in USA) by OutOfAir
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. OutOfAir replacement Teflon tape is the highest quality available (Made in USA). Replacing your heat tape is recommended if it appears worn or you’ve run in to any problems with sealing.
- FITS ALL MACHINES: 3 Strips are each 18 inches long x 0.5 inches wide. These are purposely slightly longer and wider than necessary, simply trim length to fit your sealer model. The extra width gives you a bit more room to ensure proper coverage.
- PROTECT YOUR INVESTMENT: This tape is used to cover the heating element on your vacuum sealer machine. Worn out tape can cause problems when sealing, and could cause damage to your machine.
- WORKS IN ALL VACUUM SEALER MACHINES: OutOfAir replacement Teflon strips work in all vacuum sealers. Including FoodSaver, VacMaster, Weston, Cabelas, Rival, Seal-a-Meal, Ziploc and more.
- SAFE, CONVENIENT, RISK FREE: OutOfAir replacement strips are FDA Approved for direct food contact (-100 to 500F), and include a 60-day Money Back Guarantee.
With normal usage the tape protecting the heating element in most vacuum sealers doesn’t need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing.
How Do I Install My Replacement Tape?
To install:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new OutOfAir replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
And that’s it!
Will OutOfAir replacement tape work with my machine?
Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags.
For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape).
For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape).
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Similar items with 4 stars and above
5301EL1001 for LG Dryer Heater Heating Element 5301EL1001G 5301EL1001H 5301EL1001J
with Thermostats
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 16.9ounces
Origin: China
Color: White
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
Conclusion
By our suggestions above, we hope that you can found heating element tape for you.Please don’t forget to share your experience by comment in this post. Thank you!
