Best Heating Element Resistance Wire 4000W

This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)

This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)

Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.

Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.

Wire Specifications:

– Diameter: 22 Gauge / 0.64mm

– Shape: Round

– Alloy Kanthal A-1

– Length 100 ft.

– Heat Treatment Annealed (soft)

– Melting Temperature 1500°C / 2730°F

– Max Continuous Operating Temp: 1400°C / 2550°F

– Resistance: 1.31 Ohms/ft at room temperature

Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.

This wire is for repair and maintenance of electronic components.  Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.

120V 1600W 100702 Replacement Heating Elements For Hot Air Tools
Description:
High temperature resistance alumina ceramic heating element with import kanthal resistance wire use for handheld hot air tools.
Specifications:
Model: 100702 heating element
Voltage: 120 V
Power: 1600 W
Type: 33
Diameter 26mm
Weight: 0.1 kg
Package: 1pcs
Application:
120V 1600W 100.702 replacement heating element for Diode S and Triac S hot air tools
120V 1600W 5100702 replacement heating element for Rion hand held plastic welder heat gun

Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.

Conclusion

By our suggestions above, we hope that you can found heating element resistance wire 4000w for you.Please don’t forget to share your experience by comment in this post. Thank you!