homedecorcreation 
Nowadays, there are so many products of gas oven inlet valve in the market and you are wondering to choose a best one. You have searched for gas oven inlet valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gas oven inlet valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Earth Star 100000BTU LPG/NG Gas Oven Stove Inlet Valve Pilot Burner With 0.9 Meters M10x1 Thermocouple And Ignition Wire Including Knob Whole Sets
- Safety valve: yes / With pilot fire: yes / Auto gas cut off: yes
- Flameout safety protection: yes / Flow medium: gas / Material: pure copper
- With thermocouple: yes / Inlet : 1/2-14NPT / Outlet: 1/2-14NPT
- Flat Rotation: 06:00[pilot burner with 900mm thermocouple and ignition wire including Knob whole sets]
- Air inlet valve of gas stove
100000BTU LPG/NG gas oven stove Inlet valve, pilot burner and Knob whole sets Specifications: Safety valve: yes With pilot fire: yes Auto gas cut off: yes Flameout safety protection: yes Flow medium: gas Material: pure copper With thermocouple: yes Inlet : 1/2-14NPT Outlet: 1/2-14NPT Flat Rotation: 06:00 [pilot burner with 900mm thermocouple and ignition wire including Knob whole sets]
3203459 Stove/Oven Gas Safety Valve Replacement for Frigidaire Y-30128-35AF, 774T117P10, 5303131449, 3201101, 316066400, 3131449
This is a 3203459 Stove/Oven Gas Safety Valve Replacement for Frigidaire Y-30128-35AF, 774T117P10, 5303131449, 3201101, 316066400, 3131449. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Earth Star 100000BTU LPG/NG Gas Oven Stove Inlet Valve Pilot Burner and Knob Whole Sets
100000BTU LPG/NG gas oven stove Inlet valve, pilot burner and Knob whole sets Specifications: Safety valve: yes With pilot fire: yes Auto gas cut off: yes Flameout safety protection: yes Flow medium: gas Material: pure copper With thermocouple: yes Inlet : 1/2-14NPT Outlet: 1/2-14NPT Flat Rotation: 06:00
Maxitrol RV48L Natural Gas Pressure Regulator, 1" In and Out Opening, 3/4" FPT Thread,1/2 PSIG Inlet Pressure, 3"-6" WC Outlet Pressure
- GAS TYPE & PRESSURE – Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3″ – 6″ Water Column
- PIPE THREAD SIZE – 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- CAUTION – This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- MARKING – Model: RV48L, Marking: 1/2 PSIG, Po 3″ – 6″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 3″-6″ Water Column.
- OPERATE TEMPERATURE – 32°F – 225°F (0°C – 107°C), Indoor Only, Not for outdoor usage. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Maxitrol Pressure Regulator for Natural Gas (NG)
Product Description:
- Brand: Maxitrol
- Gas type: Natural Gas (NG)
- Refer to the pictures on how to find the correct pipe thread size. This regulator has 1″ openings for 3/4″ gas pipes. 3/4″ IN and 3/4″ OUT Female Pipe Thread. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
- Outlet pressure range: 3” – 6” Water Column
- Ambient operating temperature range: 32°F – 225°F (0°C – 107°C).
Attention:
- NOTE: GAS PRESSURE REGURATORS WILL NOT TURN OFF THE FLOW OF GAS.
- The pipe fittings for this regulator are based on NPT pipe threads – dimensions according ANSI/ASME B1.20.1 standards.
- Install the regulator properly with gas flowing as indicated by the arrow on the casting.
- *NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
How to find the correct pipe thread size
- WARNING: The NPT thread size is NOT referring to the size of the thread itself!
- The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
- Measuring the pipe will often mislead you into choosing the wrong pipe size.
- The “pipe thread size” is measured and based on the inside of the pipe.
- A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
- The NPT thread is referring to the Interior Diameter of the pipe.
STYDDI LPG Propane Gas fire Pit Control Safety Valve with Thermocouple Heater Flame Failure Control Parts for Low Pressure Application, 3/8" Flare Inlet and Outlet
- DESIGNED FOR FIREPLACES & FIRE PITS FOR PROPANE GAS: Flame failure valve with inlet and outlet with Flare thread 5/8”- 18UNF(3/8″Flare), 600mm thermocouple with M8*1 threaded head. Valve Spindle “D” shaft for 6mm knob, with M15 nut to fix on your panel plate.
- THE DIY GAS APPLIANCE FOR EASY INSTALLATION: This can be a DIY gas appliance and installed vertically at the opening of the device container easily with necessary nuts.
- CE&CSA CERTIFICATED FOR YOUR SAFETY: CE&CSA tested Main Control Valve In & Out with 3/8″ Male Flare thread. NOTE: Keep the thermocouple to be heated and push the valve around 5-10s then release hand (if flame stops, adjust the location of thermocouple tip)
- PREMIUM QUALITY WITH HIGH TEMPERATURE RESISTANCE: Made of high-quality brass material with heavy-duty construction for durable usage. Voltage＞20mV, thermocouple temperature resistant from -200 to 650 Degree Celsius.
- PERFECTLY COMPATIBLE WITH ALL LOW PRESSURE HEATERS: Suitable for all kinds of low pressure heaters. Used for gas fireplace, fire pit, grill, BBQ stove, oven, catering cooker, patio heaters etc. ATTENTION: It’s a low pressure valve rated around 50000BTU need to work with thermocouple, please confirm your system before order to avoid return.
STYDDI Propane Gas Heater Fire Pit Main Control Valve with Thermocouple & Switch
Specifications:
Total Length: 600mm
Head Thread Size: M8*1
End Connection Size for Valve: M8*1
Max BTU rating: 50000
Working pressure: 65mbar
Voltage:＞20mV
Thermocouple temperature: -200 ~ 650 Degree Celsius
Time For Opening Valve: Less Than 10s
Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly enough in case of gas leakage)
3). Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly If when you release hand, gas valve shut off again, please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connected with valve
c. If the inlet and outlet side well connect with hose you have
Possible problems occurs during your use: Valve after turn can not stick during using
Reason: a. The thermocouple head is not heated in right place, please adjust thermocouple tip position;
b. The connection between thermocouple end and valve is not connected tight enough or too tight, please adjust the screw again.
Solution: Need to push valve first then turn the spindle and hold for few seconds, it cannot stick immediately may need 5-15 Seconds.
Package Content:
1Pcs x Gas Control Valve with Thermocouple and Knob Switch
MeTer Star Propane lpg Gas fire Pit Control Safety Valve Flame Failure Device Cock Gas Heater Valve with thermocouple and knob
Propane lpg gas fire pit gas control safety valve flame failure device cock with thermocouple and knob Description Fire pit / gas heater valve Inlet and outlet 3/8 Flare thread Outlet pressure: 1/2PSI (65MBAR) Thermocouple 600mm Bakelite Knob diameter around 40mm, Shaft size 6mm. Suitable for all kinds of low pressure heaters, BBQ stove and ovens.
SHINESTAR 12Feet 1/2-inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings & 3/8 Female to 1/2 Male Adapter for Outdoor NG/Propane Appliance
- 1/2″ ID Hose with 1/2″ Quick Disconnect Plug x 1/2″ Female Flare Fittings & 3/8” Female Flare by 1/2” Male Flare Brass Adapter
- 1/2-inch inside diameter hose has the BTU capacity needed for 30-inch and larger grills for use with natural gas
- Includes the 3/8”Female Flare by 1/2” Male Flare Brass Adapter, allows you to convert NG to 3/8″ male connector propane appliance
- Hose length 12feet, allows you to move gas appliance around. Connects any outdoor NG appliance to the gas supply piping
- Comes with dust cap and plug for protecting the brass fittings
Actually, both natural gas and propane gas can be used in gas grills, but the burning conditions are different. We have 1/2” male flare to 3/8” female flare fittings to convert to your 3/8″ male connector propane appliances.
Natural gas burns a little cleaner than propane gas, and it’s more convenient than a propane tank that always needs to be carefully filled.
Product Specification：
Max Working Pressure :1/2 PSIG
Flow Capacity :100000 BTU/hr
Inlet Diameter :1/2″ NPT
Outlet Diameter :3/4″-16UNF
Certificate :CSA
Heavy Duty Metal WB03K10303 Chrome Cooktop Control Knob Compatible with GE Replacement by AMI PARTS (5 Pack)
- PARTS NUMBER: WB03K10303 (5 Pack)Chrome Cooktop Control Knob
- Replaces the following Part #’s:WB03K10303,WB03K10208,AP4980246, PS3486484,1810427, AH3486484 and B00MOCK0PM.
- PREMIUM QUALITY – The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards!
- SAVE MONEY AND TIME:Saves you a service fee from the appliance guy! Inexpensive way to fix or repair a range.
- BUY WITH CONFIDENCE:For any reason you’re not completely satisfied, you can ask for a replacement or full refund.
Replacemen 30128-35AF Gas Range Oven Safety Valve for Electrolux 3203459 AP2131109 PS446204
Oven Valve.
This is a direct replacement oven valve for Frigidaire part number 3203459
Inlet is 3/8″ tubing. Two terminals on valve; one is 1/4″ male one is 3/16″ male. Replacement for numbers AP2131109 and PS446204.
MENSI New Gas Steak Oven Grill Brass Main Control Valve with One Inlet & Outlet M10x1 Male Thread
- Steak oven brass control valve inlet& outlet thread M10*1 male thread
- With micro switch wire 15cm on valve connect a AA or AAA battery igniter without push
- Flame failure safety valve need to connect with Thermocouple sensor M8*1 nut
- Head with Bracket can fixed your oven board plate with four screws suitable for low pressure application max 50000BTU
- Brass valve shaft “D” for knob is 8mm inserts
New Gas Steak Oven Grill Brass Main Control Valve with One Inlet & Outlet M10x1 Male Thread
Valve Entrance & Exit with 3/8″ Male Flare Thread Working Pressure: 1/2″PSI (65Mbar Max) Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the bracket with screws.
2). Connect your inlet and outlet with M10*1 female copper , stainless steel or alumium tubes
3). Faston the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve
around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly
If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connect with valve
c. If the inlet and outlet side well connect with hose you have
Conclusion
By our suggestions above, we hope that you can found gas oven inlet valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
