The 9 Best Fridge Connection And Ice Maker Kit For Reverse Osmosis

Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.

Enjoy reverse osmosis purified water and crystal clear ice cubes straight from your fridge dispenser. The Olympia Water Systems refrigerator/ice-maker kit includes everything needed to connect your existing reverse osmosis system to your fridge/ice-maker as an additional dispensing location. Once your reverse osmosis system is connected to your fridge, the small existing fridge filters are no longer needed. This kit works for all Olympia reverse osmosis systems and most standard under-sink reverse osmosis systems with ¼” tubing. The kit includes 20 feet of ¼” tubing, a ¼” x ¼” x ¼” quick connect tee fitting, a ¼” x ¼” quick connect shut-off ball valve, a compression fitting set and instructions.

Many modern refrigerators offer the convenience of ice makers and cold water door dispensers, while offering minimal filtration. With this kit you can connect your reverse osmosis (RO) system or drinking water filter to your refrigerator, coffee maker, water cooler, or other devices to enjoy the same purity of water.

Note: Tubing color and component design may vary from that pictured.

This high-quality ice maker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system.
You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.
his ice maker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system.
t includes one quick-connect “tee” fitting, one quick-connect shut off ball valve and 16 feet length of 1/4 inch food-grade poly tubing.
he “tee” fitting diverts the ro purified water between the fridge and ro faucet giving access to both outlets.
The ball valve can be used to shut off water flow to the fridge.
and most standard under-counter reverse osmosis systems using 1/4 inch tubing and connectors.

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!

The Whynter IMC-491DC Portable Ice Maker is a premium stainless steel countertop ice maker for use in your kitchen, home bar or office. In addition to quickly and efficiently making perfectly bullet-shaped ice cubes, the Whynter IMC-491DC Portable Ice Maker can produce up to 49 pounds of ice per day. You are also able to control and monitor the ice production on the LED display and soft-touch panel.

Conclusion

By our suggestions above, we hope that you can found fridge connection and ice maker kit for reverse osmosis for you.Please don’t forget to share your experience by comment in this post. Thank you!