Best Diesel Filter Water Separator

WATER-BLOCK filter removes water from gasoline and diesel fuel. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Also removes microscopic particles (17 microns) of rust, sand, dirt, scale and lint. Also compatible with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. See-Thru bowl allows for visual monitoring of fuel flow. Maximum recommended flow rate is 25 gpm. Gravity flow rate is approximately 5 gpm with a 24 inch head. Working pressure up to 150 psi.

Available for 2013-2016 Dodge Ram 3500 With Diesel Engine
Available for 2013-2016 Dodge Ram 2500 With Diesel Engine

If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.

R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.

The Item Is New Aftermarket Replacement for The Models of Isuzu NPR 1998 – 2004 Diesel 4HE1 4.8L Isuzu NPR-HD 1998 – 2004 Diesel 4HE1 4.8L Isuzu NQR 1998 – 2004 Diesel 4HE1 4.8L

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel
equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.

MAXIMUM FLOW RATE: 60 GPH (227 LPH)
FILTER RATING: 2, 10, and 30 micron
PORT/CONNECTION SIZE: M14*1.5
ADDITIONAL DETAIL: 15 PSI (1.03 bar) Max Pressure

Product benefits:
1.The reusable clear collection bowl are made of nylon.High temperature resistance.Not easy to fall color,not easy to deformation .It will not damage this collection bowl because of the high temperature of the oil.

2.The top plug of the fuel filter is used for drainage.The water can be controlled by adjusted the plug at the top.

3.The bottom two plugs of the fuel filter are used for air-bleed.Can be discharged the excess gas.

4.Inside filter can anti-oxidation,anti-rust,anti-corrosion.Does not cause difficulty in filtering.There are many small holes on the filter surface that can be effective in filtering impurities.At the same time, it is made of a whole piece of aluminum, will not tear.Easy to disassemble.So when you use it for a while, you need to clean it. In this way,it can play the best effect.

Conclusion

By our suggestions above, we hope that you can found diesel filter water separator for you.Please don’t forget to share your experience by comment in this post. Thank you!