Best Dc Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element

Heating elements from UltraSource provide controlled heat for proper knife sterilization.

Product Features

12V 150W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:12 volts

Wattage:150 watts

Item Weight:7.7 ounces

Product Diameter: 8mm

Tube length:175mm

Screw Type:1”NPT

Color:White

Product Features

12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:12 volts

Wattage:600 watts

Item Weight:10.95 Ounces

Product Diameter: 8mm

Tube length: 170mm

Screw Type:1”NPT

Color:White

Product Features

12v 100W Cartridge Heater widely used for 3D printer

From the Manufacturer

The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.

Application

1: Boiling water because of flange

2: Patient Comfort heating used in medical devices

3: Mold die and platen heating

4: Seal bars used in packaging equipment

5: Heating of hot stamps
Technical Details

Tube length: 100mm

Tube diameter: 8mm

Wire length: 32cm

Product Features

48V 1000W Foldback Water Heater Element: These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 48v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:48 volts

Wattage:1000 watts

Item Weight:9.7ounces

Product Diameter: 8mm

Tube length: 180mm

Screw Type:1”NPT

Color:White

Product Features

36V 1200W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 36v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:36volts

Wattage:1200 watts

Item Weight:11ounces

Product Diameter: 8mm

Tube length: 7.5 Inch

Screw Type:1”NPT

Color:White

Product Features

24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:24volts

Wattage:600 watts

Item Weight:10.6ounces

Product Diameter: 8mm

Tube length: 155mm

Screw Type:1”NPT

Color:White

Product Features

24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc


→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months


NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.


Technical Details

Voltage:24volts

Wattage:600 watts

Item Weight:10.6ounces

Product Diameter: 8mm

Tube length: 175mm

Screw Type:1” NPT

Color:White

Specifications:

Material:Stainless Steel

Color: Silver

Rated Power: 700W

Operating Voltage: 12V

Suitable For: Mold temperature, heating furnace, drying furnace, solar water heaters, etc.

Thread Diameter: 3.7cm / 1.46’’(appr.)

Total length: 20 cm / 7.87’’(appr.)

Tube Size: (L)×(W)17.3 × 2.6 cm / 6.81’’× 1.02’’(appr.)

Features:

Brand New and high quality.

Simple structure, easy to install, and long lasting.

Electrical heating element for home appliance, no spark, no naked fire and safe.

Fast heat exchange rate, high mechanical strength and quick temperature raising rate.

Widely used in a variety of saltpeter tank, sink, tank, acid tank, fusible metal melting furnace, air heating furnace, drying oven, hot stamping die and other devices.

Tips:

1.the components should be stored in dry place, if the insulation resistance dropped to less than 1 megohm due to long-term placement, it can be dried in an oven at about 200 ℃ for several hours (or put the element in low voltage for several hours), or restore insulation resistance.

2.If you found that the surface of the tube has carbon, it must be removed before using,so as not to reduce efficiency, or even burn components.

3.Melting asphalt, paraffin and other solid oils should reduce the voltage before using,and then rose to the rated voltage after melting, in order to prevent the concentration of power and improve component using life.

Package included: 1 Pcs. Heater Element

Fahrenheitto Celsius conversions:

35 F = 1.66 C, 120 F = 48.88 C, 140 F = 60 C, 170 F = 76.66 C

We are commonly asked, “How many watts are required to heat one gallon of water up one degree?”

     It requires 2.47 watts for one hour to heat one gallon of water one degree Celsius conversions:. 

Conclusion

By our suggestions above, we hope that you can found dc immersion heater submersible water heater element stainless steel heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!