homedecorcreation 
Nowadays, there are so many products of cook top ignitor in the market and you are wondering to choose a best one. You have searched for cook top ignitor in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cook top ignitor which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
31,090 Reviews Scanned
Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001
- This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves
- Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors
- . Be careful not to drop your new ignitor
- ignitors are fragile and will break easily.
he oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.
Gas Range Oven Cooktop Flat Ignitor Igniter for Whirlpool KitchenAid 9782065
- Brand New – Unused Parts,Includes (1) igniter as pictured
- Flat igniter for Whirlpool and KitchenAid Stoves
- Replaces part number 9782065
- Amperage range = 3.3 – 3.6
- For models: GW395LEGB5 GW395LEGB6 GW395LEGQ5 GW395LEGQ6 GW395LEGT5 GW395LEGT6 KGRC608LSS0 KGRC707LBL0 KGRC707LBS0 KGRC707LBT0 KGRC707LWH0 KGRT600HBL6 KGRT600HBL8 KGRT600HBL9 KGRT600HBT6 KGRT600HBT8 KGRT600HBT9 KGRT600HWH6 KGRT600HWH8 KGRT600HWH9 KGRT607HBL6 KGRT607HBL8 KGRT607HBL9 KGRT607HBS6 KGRT607HBS8 KGRT607HBS9 KGRT607HBT6 KGRT607HBT8 KGRT607HBT9 KGRT607HWH6 KGRT607HWH8 KGRT607HWH9 KGSC308LSS0 KGST300HBL6 KGST300HBL8 KGST300HBL9 KGST300HBT6 KGST300HBT8 KGST300HBT9 KGST300HWH6 KGST300HWH8 KG
Gas Range Oven Stove Cooktop Round Ignitor Ignter for Amana 77001258 89333 86690
- This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.
- Compatible Brand:Whirlpool Estate KitchenAid Roper Maytag Admiral Amana Speed Queen Jenn-Air Magic Chef Crosley Caloric Glenwood Hardwick Menumaster Modern Maid Montgomery Wards Norge JC Penney Wards Sears Kenmore
- REPLACES PART NUMBERS:77001258 Y0072203 Y0072202 Y0070957 Y0070369 Y0070245 Y0069737 Y0068018 Y0068017 Y0068016 Y0068015 Y0068014 Y0068013 Y0061568 Y0061567 89333 86690 86689 70369 68018 68016T 68016 68015 68014 68013 309151 309150 068016T 0309151 0309150 0309142 0091160 0089333 0086690 0086689 0072203 0072202 0070957 0070369 0070245 0069737 0068018 0068017 0068016 0068015 0068014 0068013 0061568
- Fit Models:RVP397 RVP399
REPLACES PART NUMBERS:77001258 Y0072203 Y0072202 Y0070957 Y0070369 Y0070245 Y0069737 Y0068018 Y0068017 Y0068016 Y0068015 Y0068014 Y0068013 Y0061568 Y0061567 89333 86690 86689 70369 68018 68016T 68016 68015 68014 68013 309151 309150 068016T 0309151 0309150 0309142 0091160 0089333 0086690 0086689 0072203 0072202 0070957 0070369 0070245 0069737 0068018 0068017 0068016 0068015 0068014 0068013 0061568
Gas Range Oven Stove Cooktop Flat Ignitor Igniter for Viking PB040001
Included with this ignitor is:
1 Ignitor
2 Ceramic Wire Nuts
2 Wire Assemblies, with Female Insulated Terminals
This is a Flat Bar Syle Ignitor.
The White Ceramic part of the ignitor measures 2-1/4″ Long.
The Ignitor part (the part that glows) measures 2″ Long.
The overall length from end of ceramic to end of the metal bracket is 4-1/2″.
The 2 wires measure 12-1/2″ Long from terminal end to ceramic.
Gas Range Oven Stove Cooktop Flat Ignitor Igniter for LG MEE61841401
The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.
(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001
- This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves
- Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors.
- Be careful not to drop your new ignitor
- ignitors are fragile and will break easily.
The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.
addtoword Jade Range Gas Range Oven Stove Cooktop Flat Ignitor Igniter 501A
This is a Brand New Oven/Stove Replacement Ignitor
5303935066 Replacement for Fluxidaire Electrolux Gas Oven Stove Cooktop Flat Ignitor Igniter
- REPLACES PART NUMBERS: 5303935066 P205034 P205016 P205013 F17-039 F17-038 F16-747 AP205016 AP205013 AP00205013 8009420 5308009420 5303937521 5303210788 5303207521 5303207520 5303131300 316T031P02 316T031P01
- COMPATIBLE WITH MOST TOP NAME BRANDS:Frigidaire Electrolux Franklin Gibson White-Westinghouse Westinghouse Tappan Kelvinator Sears Kenmore
- SPECS:This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor
- ignitors are fragile and will break easily
REPLACES PART NUMBERS: 5303935066 P205034 P205016 P205013 F17-039 F17-038 F16-747 AP205016 AP205013 AP00205013 8009420 5308009420 5303937521 5303210788 5303207521 5303207520 5303131300 316T031P02 316T031P01
COMPATIBLE WITH MOST TOP NAME BRANDS:Frigidaire Electrolux Franklin Gibson White-Westinghouse Westinghouse Tappan Kelvinator Sears Kenmore
SPECS:This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily
DESCRIPTION:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.
LG Gas Range Oven Stove Cooktop Flat Ignitor Igniter MEE61841401
- Exact Replacement Range Oven Glow Bar Ignitor for LG part number MEE61841401.
- This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor
- ignitors are fragile and will break easily.
The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.
Conclusion
By our suggestions above, we hope that you can found cook top ignitor for you.Please don’t forget to share your experience by comment in this post. Thank you!
