homedecorcreation 
Nowadays, there are so many products of automatic hot water valve in the market and you are wondering to choose a best one. You have searched for automatic hot water valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings automatic hot water valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
16,500 Reviews Scanned
Watts Automatic Fill Valve for Hot Water Boiler
Hot & Cold Water Mixing Valve Temperature Control Thermostatic Mixer for Automatic Sensor Faucet
- This is a mixing valve for automatic sensor faucet.
- Brass construction ensures a stable performance.
- Connections: G 1/2″.
- Connect to hot and cold water- and mixed out
- Easy control of hot and cold water mixing ratio to adjust water temperature.
- Built-in check valves are effective in avoiding cold and hot water backflow.
Watts 0590715 1/8" FV-4M1 Automatic Float Vent
- Maximum Pressure: 150 psi (10 bar)
- Temperature Range: 33F – 240F (5C – 116C)
- Float is high temperature resistant polyethylene
- Suitable for use with glycol systems
- Impurities do not usually affect function as maximum float line of water is always lower than the valve seal
Watts Series FV-4 Automatic Vent Valves are used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. Series FV-4M1 has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. Can be disassembled for inspection and cleaning.
G1/2 Hot Cold Water Mixing Valve 3 Ways Thermostatic Mixer Temperature Control for Automatic Faucet for Water Sink Bathroom Toilet
- Thickened brass valve ensures a stable performance and long service life.
- Easy control of hot and cold water mixing ratio to adjust water temperature.
- One end is cold water inlet, one end is hot water inlet, and the middle mixed water outlet, easy to install and use.
- G1/2 standard thread fits for many household or commercial pipes.
- Built-in check valves are effective in avoiding cold and hot water backflow.
Description:
Automatic faucets do not have hot & cold handles to adjust the water temperature coming out of the spout, and normally installed to a single water supply only.
This valve is used for a automatic faucet to mix hot and cold water, and to control water temperature.
Specifications:
Main Material: Brass
Thread: G1/2 (BSP)
Size: 70*55*50mm
Working Pressure; 0.05MPa-0.5MPa
Cold Water Temp: 0℃
Hot Water Temp: 85℃
Outlet Flow Rate: 20m3/h
Package Includes:
1 x Valve
Hydro Master 0571800 1/8 Inch Automatic Air Vent Valve
- Universal 1/8″ auto air valve vent, suits for most heating system
- Made from heavy duty brass construction, durable and eco-friendly
- Maximum operating pressure 150 psi and maximum operating temperature 240°F
- 1/8″ male NPT threaded connection
- Working great with our 1″ and 1-1/4″ air scoop
Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System
- Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings.
- Compatibility: This valve works only with models 500800, 500803, 500805, and 500899.
- This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater.
- Features: Thermal By-Pass Technology
- Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches
This additional sensor valve is for homes with a branched hot water line. The kit includes a sensor valve and two 12 inch supply lines with adapter fittings. If your home has a branched hot water line simply install this sensor valve kit at the end of the branched line. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.
G1/2 Faucets Hot & Cold Water Temperature Mixer Mixing Valve Temperature Control Thermostatic Mixer for Automatic Sensor Faucet
- 【High quality】100% brand new and high quality mixing valve for automatic sensor faucet.
- 【Premium material】Made with thickened brass valve ensures a stable performance and long service life.
- 【Easy to use】Connect to hot and cold water then mixed out, easy to
- control hot and cold water mixing ratio to adjust water temperature.
- 【Practical tool】 Built-in check valves are effective in avoiding cold and hot water backflow.
Description:
Automatic faucets do not have hot & cold handles to adjust the water temperature coming out of the spout, and normally installed to a single water supply only. This valve is used for a automatic faucet to mix hot and cold water, and to control water temperature.
Features:
【High quality】100% brand new and high quality mixing valve for automatic sensor faucet.
【Premium material】Made with thickened brass valve ensures a stable performance and long service life.
【Easy to use】Connect to hot and cold water then mixed out, easy to
control hot and cold water mixing ratio to adjust water temperature.
【Practical tool】 Built-in check valves are effective in avoiding cold and hot water backflow.
【Specification】 G1/2 standard thread fits for many household or commercial pipes.
Specifications:
Main Material: Brass
Thread: G1/2 (BSP)
Size: 70*55*50mm
Working Pressure; 0.05MPa-0.5MPa
Cold Water Temp: 0℃
Hot Water Temp: 85℃
Outlet Flow Rate: 20m3/h
Package Includes:
1 * Valve
FloodStop Water Heater Auto-Shutoff Valve, FS3/4NPT, V4 Controller, Water Damage Prevention
- PREVENT WATER DAMAGES – This automatic shut off valve will trigger when a leak is detected from your water heater, potentially preventing 200+ gallons of water leaking into your home.
- EASY TO INSTALL – The FloodStop valve is installed between the water heater and the manual shutoff valve
- can be installed in fifteen minutes.
- SENSOR AT BASE OF HEATER – The sensor part of this system is placed at the base of the water heater. As long as the sensor stays dry, the valve will stay open permitting water to flow through to the heater.
- IMMEDIATE SHUTDOWN – Once the leak sensor at the base of the heator senses moisture, the valve will immediately close off all water flow and sound alarms.
- CERTIFIED LEAD FREE – Certified lead free under S. 3874, AB1953 with a One Year Manufacturer’s Warranty.
Prevent flood damage and avoid costly repairs with the easy-to-install, newly designed Lead free Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel’s alarm. Designed for both residential and commercial dwellings. The FloodStop (FS 3/4-NPT) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. This kit includes everything you need to protect your property from costly water-leak damage: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. A power supply is included; you need to also install four AA batteries (not included) for backup power, unit will beep to alert you of low or no batteries. The controller has “one” output contact (normally open) that can be attached to a dialer or security system so you can be alerted to a leak when not home! You can even add multiple water sensors for different areas around your water heater. If your water heater should begin to leak, the controller tells the water valve to close and alerts you with an 87db alarm.
E-SDS Water Leak Detector with Shutoff Valve,Sensors and Sounds Alarm,Automatic Water Leak Shut Off Valve System,for Pipes 3/4 NPT,Flood Prevention for Laundry,Water Heaters and More
- Leak Detection Automatic Shutoff–Leak Prevention Device will automatically shut off the water to your appliances to keep your house from flooding when you’re out off home.It also includes manual open/close buttons and a button to reset after the leak is repaired.It’s be used in so many locations in residential and commercial environments like water heater and laundry.
- Automatic Shutoff Valves & Easy installation–The brass NPT threaded 3/4 ball valves which allows you to control a flood
- It will shut off the water when the system detects a leak.It could be used with hot water.Temp≤100℃(212℉).Easy installation by attaching to existing plumbing.
- Vacation Mode– This device gives you the ability to manually shut off the water while on your trip.
- Water Leak Sensor– Comes with a sensor that will shut off the water when the water reaches it.Cable length of Water leak sensor:19.68ft/6m.
- WARRANTY: Two year warranty
- Contact our customer service and they will help with any issues and concerns that you may have.Note:The port inside this valve will be smaller than 3/4.
Conclusion
By our suggestions above, we hope that you can found automatic hot water valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
