homedecorcreation 
Nowadays, there are so many products of american plumbing water filter housing in the market and you are wondering to choose a best one. You have searched for american plumbing water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings american plumbing water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
45,729 Reviews Scanned
AQUA CREST 5 Micron 10" x 4.5" Whole House Big Blue Sediment Replacement Water Filter for GE FXHTC, American Plumber WRC25HD, GXWH35F, GNWH38S, Pack of 2
- WATER PURIFICATION: Offers clean and fresh water to you and your family
- FILTRATION ABILITY: Uses GAC (granular activated carbon) with 5 micron rate to effectively reduce chlorine and remove all large particles like sand, rust and other impurities
- FILTER LIFE: Long lasting up to 3 months or 30,000 gallons
- REPLACEMENT MODEL: GE FXHTC, GXWH40L, American Plumber GXWH35F, GNWH38S, WHIRLPOOL WHKF-WHPCBB, WRC25HD, GXWH30C, GNQH38S, Pentek RFC-BB, Culligan RFC-BB ,HD-950A, Whirlpool WHKF-GD25BB, RFC-BBSA, and most systems with 10″x4.5″ filters.
- Please note that the FXHTC water filter uses GAC(granular activated carbon) to reduce chlorine, sand, rust and other impurities in water while the FXHSC filter is made from durable pleated polypropylene, but both of them fit the most systems with 10″ x 4.5″ filters.
Whole House Big Blue Clear Blue Transparent Water Filter Housing with 1" US NPT Brass Ports for standard Big Blue Size 4.5 x 10 Cartridge – Complete with Wrench, Baracket and Screws
- Uses standard size 10” x 4.5” Big Blue water filter cartridges sold separately
- Sediment filters Cartridges are Amazon item B071FGVMVH
- Carbon filters Cartridges are Amazon item B072FSP5F6
- Heavy-duty Construction with Standard Size US NPT 1″ Brass Ports for high flow applications. Easily installs at the main water supply for your whole house water filtration needs.
- Complete Systems with Wall Bracket, screws and Housing Wrench.
10″ Big Blue Whole House water filtration system. Filter Housing features: Double O Ring Seal Gasket 1 inch NPT brass ports and pressure release button. The red pressure-relief button on the cap makes filter changes easier by releasing any pressure inside the housing. It is ideal for residential, commercial, and industrial filtration where high-flow rates are required. Complete Systems with Wall Bracket, Screws and Housing Wrench. Standard size filter 4.5”x 10”
American plumber W10PR Heavy Duty Water Filter Housing
American plumber W10PR heavy duty Water Filter housing. Our durable line of professional grade water filtration products addresses a wide variety of household and light commercial water quality concerns, including sediment, hardness, chlorine taste & odor, and bad taste & odor, as well as reduction of lead, cysts, and organic and chemical contaminants.
American Plumber W50PEHD Filter
American Plumber products provide solutions for a broad range of residential and commercial water quality concerns. Choose from a comprehensive selection of filter housings, filter cartridges, point of use and whole house filtration systems, water softeners and accessories.
Similar items with 4 stars and above
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 158110 3/8" #5 Slim Line Clear Filter Housing
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief
iSpring WSP-50 WSP-50-Reusable Spin Down Sediment Water Filter-50 Micron, 20 GPM, 1" MNPT + 3/4" FNPT, Brass
- High impact stainless steel mesh filter screen rated at 50 Micron
- Ideal first layer of filtration before a larger filtration system
- Flushable and reusable, takes considerable workload off finer filters that follow behind it
- helps create a multi-layer gradient filtration system for better filtration results and longer filter life
- See through housing offers easy visual monitoring
- system body with 1-year
- Double threads on both ends: 1 inch MNPT and 3/4 inch FNPT, flush out valve has garden hose barb fitting
The WSP-50 spin down sediment filter is ideal for filtering out course sediment larger than 50 micron. The stainless steel screen makes the flushing and cleaning process very simple, allowing flushing of the contaminants through the bottom of the filter when the cartridge begins to get clogged. This allows the stainless steel filter cartridge to be used over and over again without needing to be replaced. The 1 inch outlet MNPT fitting provides a maximum 20 gpm flow rate, and the WSP-50 also features 3/4 inch NPT threads on the inlet and outlet. The housing is manufactured with FDA approved grade materials.
Specifications:
Mesh pore rating: 50 micron
Dry weight: 1 lb
Dimensions: 3.5″ width x 9″ height
Suitable temperature range: 40 – 100 °F
Suitable pressure range: 20 – 90 psi
Pentek SW-2 Standard Housing Wrench
This Pentek SW-2 standard housing wrench is made of plastic for resistance to corrosion and is suitable for use with the Pentek AS-301E under-sink water filtration system. The wrench reduces the effort required to tighten and loosen the filter housings in this filtration system. This housing wrench is suitable for use in installing or replacing filter cartridges.
Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Conclusion
By our suggestions above, we hope that you can found american plumbing water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!
