Best Compatible Replacement Water Ionizer Filter For Kangen Enagic Leveluk Sd501hg

HG-N type Replacement Filter for Kangen Enagic Leveluk Toyo Ange Impart;HG-N Newer Model -SD 501 Platinum SD501HG-N MW7000 Leveluk Leveluk DX LevelukDXII Leveluk Jr Leveluk JrII Le;Advanced filtration with granular actived carbon filter, Filtration Capacity: 12,000L (depending on the water quality);Not fit to HG model(Sold before Dec 31, 2010);Made in Korea

This HG-N type filter can fit to only New type of kangen machine which made after 2011. Older type kangen machine need the HG type older version filter.

Imported from Japan. Not fit to “HG-N’ newer model (Sold after Jan 1,2011). This is “HG” ORIGINAL model filter(Sold before Dec 31,2010). Please check if you have the two notches on center hole or not. This “HG” filter doesn’t have the extra notches and the center hole is completely round.

Japan made PreThere are two models for the replacement filters on Enagic machinesmium grade cartridge is designed to effectively remove lead, chlorine, sediments, and odor from your tap water. Provides clean, great-tasting water. Made in Japan. Fit into Enagic Leveluk SD 501HG. This filters are compatible with Enagic Original model such as the Leveluk DX II, SD501HG, and SUN-US. Newer model water ionizers take only the HG-N filters. Please note does not fit LevelukSD501 Platinum DO NOT Fit into late model(After 2011) of SD 501HG-N. ***PLEASE RECONFIRM YOUR FILTER CHOICE ABOVE TO ENSURE YOU HAVE SELECTED THE PROPER FILTER FOR YOUR MACHINE*** It is VERY IMPORTANT to choose the right filter! Open the filter door to verify whether you have the Original Model Filter, or the NEW HG-N Filter. THIS FILTER IS ORIGINAL MODEL FILTER. Fit to “HG” original model. Not fit to “HG-N’ newer model(Sold after Jan 1,2011). which is “HG(original)” or late model “HG-N”. Each model of filter can only be installed onto its respective filter tray in the machine. So please check your machine before you install the filter. This is HG filter. There are two circles on the bottom. One a little smaller than the other. If the filter tray has two extra notches in the center hole (outlet) and not completely round, you have the HG-N type filter. Then our filter will not fit to your machine. If you purchased your Enagic machine in 2011 or later, most likely you have the new HG-N.

-“HG-N” type Compatible Replacement Ionizer Filter for Enagic Kangen Leveluk Toyo Ange Impart (ONLY FOR NEWER MODELS sold after January 1, 2011) -This filter removes chlorine and harmful substance as well as makes water taste better. -Using high quality material only. -Filter replacement interval: Approx. 6 months (depending on the water quality) -Filtration Capacity: 12,000L (depending on the water quality) *This is a compatible replacement filter made with Korean FDA Certified Materials by qualified Korean OEM manufacturer. Made in Korea -Compatible Models: Leveluk series, DX, Jr., SD-501, DXII, Jr. II, Super 501 and Sunus (HG-N Newer models only), all Sanastec and Impart and most Toyo water ionizers. *This filter is NOT compatible with the OLDER machines (Sold BEFORE JAN. 1 2011) which use HG filter. The HG-N type filter has TWO notches (indents) on the centered hole rim of filter and machine. PLEASE OPEN THE FILTER COVER AND CHECK YOUR OLD FILTER AND THE FILTER BASE!; Quantity: 1 Ionizer Filter + 1 Cleaning Cartridge; 1.Power off the unit and unplug it. (Be certain to shut off the faucet. Never power on the unit during cleaning procedure.) 2.Remove the filter. 3.Install the cleaning cartridge. 4.Place the flexible hose and the secondary hose into a cup. 5.Turn on the faucet until both of the hoses are fully submerged. 6.Leave the unit sitting for 3~5 hours. (Best to sit overnight) 7.Return the flexible hose and the secondary hose to their positions. 8.Turn the water on and let run for 5~10 minutes. 9.Turn off the water. 10.Remove the cleaning cartridge and install the water filter. 11. Place the filter cover back to the unit. 12.Let the water run for 3 minutes. 13. Plug the unit back in and turn on the power. *For more detailed instruction, please search the keywords, “Clean Kangen machine” on youtube.com.

-Using NCF Certified Materials -Made by Korean Water Ionizer Company, MAGICOS -Premium Upgraded (Using High-Grade Activated Carbon Cartirage) Compatible Replacement Ionizer Filter for ORIGINAL MODEL Kangen Enagic HG MW-7000 Leveluk Toyo Ange Impart -This filter removes chlorine and harmful substance as well as makes water taste better. -Using high quality material only: Sediment, Activated Carbon, Non-Toxic ABS and PP -Filter replacement interval: Approx. 6 months (depending on the water quality) -Filtration Capacity: 12,000L (depending on the water quality) -Compatible with original Enagic Kangen model HG, MW-7000, IEC-8000 & IEC-12000 *This is a compatible replacement filter made with Korean FDA Certification by qualified Korean OEM manufacturer. -Made in Korea. -Compatible Models: Leveluk SD 501, DX, DX II, SD 501U, SD 501HG, Super 501, Jr., JRII, & SUN US (NOT fit on Leveluk SD 501 Platinum, SD 501 HG-N) Ange Mark II, Ange AW880, AW960 Impart IE-300, IE-400, IE-500, IE-700, IE-900 Lotus King, Lotus Alpha, Protec, Pure Porte, Pure Porte II, Millennium, TIS-702, & Apex. *This filter is NOT compatible with the newer Enagic machines (Sold after Dec. 31, 2010) which use HG-N filter. The HG-N type filter has TWO notches (indents) on the centered hole rim of filter and machine. PLEASE CHECK FIRST YOUR OLD FILTER AND MACHINE!

TYENT Rettin Compatible Replacement Filter Set (Including ONE cleaning filter) for MMP Series 5050, 7070, 7070T, 9090, 9090T, 11T. These water ionizer filters are made by Korean OEM manufacturer and replace the Tyent standard ionizer filters. The filters fit on counter-top Tyent water ionizers and does NOT fit on under sink ionizers. Filtration Capacity: 1000gal (4000l) Quantity: 1ea 1st filter, 1ea 2nd filter + 1ea cleaning filter HOW TO USE THE CLEANING FILTER: 1. Power off the water ionizer. 2. Open the back cover to access the filter compartment. 3. Remove the second filter (Green Labeled filter). 4. Install the cleaning cartridge in the place of the second filter. 5. Adjust the water flow to full pressure. (Water must be warm. If water is cold, the cleaning time must be a few minutes longer.) 6. Turn on the water ionizer. 7. Run the machine in the mode of “H2O” mode for 25~30 minutes. (Never run the alkaline or acidic setting. ONLY use the “H2O” setting.) (If the safety cuf-off occurs after 15 minutes, please touch the “H2O” again for another 15 minutes) 8. Power off the water ionizer. 9. Remove the cleaning cartridge and install back the second filter. 10. Turn on the water ionizer. 11. Run the machine at the “H2O” settings with “cold” water for 5 minutes. 12. Please check the flow and the PH level.

-Compatible Replacement Ionizer Filter for Enagic Kangen HG MW-7000 Leveluk Toyo Ange Impart -This filter removes chlorine and harmful substance as well as makes water taste better. -Using high quality material only. -Filter replacement interval: Approx. 6 months (depending on the water quality) -Filtration Capacity: 12,000L (depending on the water quality) -Compatible with original Enagic Kangen model HG, MW-7000, IEC-8000; IEC-12000 *This is a compatible replacement filter made with Korean FDA Certified Materials by qualified Korean OEM manufacturer; Made in Korea; Compatible Models: Leveluk SD 501, DX, DX II, SD 501U, SD 501HG, Super 501, Jr., JRII, SUNUS (NOT fit on Leveluk SD 501 Platinum, SD 501 HG-N) Ange Mark II, Ange AW880, AW960 Impart IE-300, IE-400, IE-500, IE-700, IE-900 Lotus King, Lotus Alpha, Protec, Pure Porte, Pure Porte II, Millennium, TIS-702, Apex. *This filter is NOT compatible with the newer Enagic machines (Sold after Dec. 31, 2010) which use HG-N filter. The HG-N type filter has TWO notches (indents) on the centered hole of filter and machine. PLEASE CHECK FIRST YOUR OLD FILTER AND MACHINE! Quantity: One Ionizer Filter plus one cleaning cartridge; 1.Power off the unit and unplug it. (Be certain to shut off the faucet. Never power on the unit during cleaning procedure.) 2.Remove the filter. 3.Install the cleaning cartridge. 4.Place the flexible hose and the secondary hose into a cup. 5.Turn on the faucet until both of the hoses are fully submerged. 6.Leave the unit sitting for 3~5 hours. (Best to sit overnight) 7.Return the flexible hose and the secondary hose to their positions. 8.Turn the water on and let run for 5~10 minutes. 9.Turn off the water. 10.Remove the cleaning cartridge and install the water filter. 11. Place the filter cover back to the unit. 12.Let the water run for 3 minutes. 13. Plug the unit back in and turn on the power. *For more detailed instruction, please search the keywords, “Clean Kangen machine” on youtube.com.

This HG-N type filter can fit to only New type of kangen machine which made after 2011. Older type kangen machine need the HG type older version filter.

Conclusion

By our suggestions above, we hope that you can found compatible replacement water ionizer filter for kangen enagic leveluk sd501hg for you.Please don’t forget to share your experience by comment in this post. Thank you!