homedecorcreation 
Nowadays, there are so many products of differential temperature thermonstat for solar hot water in the market and you are wondering to choose a best one. You have searched for differential temperature thermonstat for solar hot water in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings differential temperature thermonstat for solar hot water which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
19,207 Reviews Scanned
Solar Heater Controller – Solar Thermostat Switch – Differential Temperature Controller for Solar Hot Water
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Solar Temperature Controller, Keenso All-Purpose Digital Temperature Difference Controller Differential Thermostat with Sensor Probe for Solar Water Heater EW-801AH AC 220V 5A
- 【Solar Heating】It will control heating system and automatically makes water temperature stay in temperature deference range. When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium.
- 【For Solar Water Heaters】The products are used in solar water heater, the temperature difference and temperature to control the output. It is provided with two output control, temperature difference control two temperature zone. If you need a temperature control table, our products are a perfect choice.
- 【Detailed Parameter】Operating Temperature: -10℃~50℃, Operating Humidity: RH≤90%, Working Voltage: AC220V ±10%(50Hz/60Hz), Heating Control Range: 2℃~99℃.
- 【Electric Heating】The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature. Two heating modes, you don’t have to worry about not having hot water.
- 【Keenso Guarantee】Keenso is the right owner to sale this item, for your safety and protection of use, so do not purchase from other seller, otherwise you may get WRONG ITEM. Our product is tested to ensure trouble-free installation and performance, please rest assured to buy.
Keenso–
EW-801AH Solar Temperature Difference Start Temperature Controller Temperature Control Table.
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Note:
1. Please kindly confirm the fitment carefully before ordering to make sure this item is perfectly fit.
2. Due to the difference between different monitors, the picture may not reflect the actual parameter of the item. We guarantee the performance and efficacy are the same as shown in the pictures and descriptions. Just give us a trust, and you will be surprised.
12V Differential Temperature Controller T2-T1 Thermostat Water Heater, Pool Solar Panel Pump 2 Sensors Fahrenheit Celsius
- it is accurate controller with 0.1 C or 0.1 F resolution controlling and Selection between Celsius and Fahrenheit
- Included Temperature controller,2 water proof sensors, manual and Wiring diagram for installation
- Equipped with 2 output (one for controlling differential value T2-T1 and another for controlling heating system) and Temperature Calibration for 2 sensors
- Temperature Range -22 ~ 230 °F (-50 ~ 110 °C) and Power Supply: 12 V DC with 10 Amp builtin relay
- Shipping to USA is 3-6 business days. For more information please go to our website Thermomart
Mini Temperature Controller Thermostat for Solar heating water, Pump,…. with a washer type temperature sensor This controller is used in a solar water system for controlling the pump (the temperature difference between the two probes) and heating system (the set point temperature). It has two internal output relays which control the pumps and heating system. When the temperature reaches the differential set value (T2-T1), it automatically runs the circulation pump, until the two temperature zones reach equilibrium according to your setting, the second relay can be used to control electric heating when the solar heating has failed to reach the set temperature. The electric heating system can automatically start heating to the set temperature, temperature difference controls and automatic constant temperature with in the set range. One Set Included 1 x Mini-Temperature Controller 2 x Temperature sensor probe with 3m cable 1 x Instruction Manual
Intelligent Temperature Switch,Temperature Sensor Solar Heater Controller,Temperature Controller Thermostat with Sensor Digital Display
- When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium
- The products are used in solar water heater, the temperature difference and temperature to control the output
- The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature
- It is provided with two output control, temperature difference control two temperature zone
- It will control heating system and automatically makes water temperature stay in temperature deference range
Features:
The products are used in solar water heater, the temperature difference and temperature to control the output. It is provided with two output control, temperature difference control two temperature zone.
When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium. The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature. It will control heating system and automatically makes water temperature stay in temperature deference range.
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Light Function Setting Range Default Unit #1 temperature difference start stop pump temperature difference +1~50 5 ℃ #1, #2 stop pump temperature difference 1~temperature difference start-1 2 ℃ #2 temperature return difference 1~20 5 ℃ #3 high temperature correction -10~10 0 ℃ #4 low temperature correction -10~10 0 ℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
Happybuy Temperature Controller, 2 Sensors
- It is accurate controller with 0. 1 C or 0. 1 F resolution controlling and selection between Celsius and Fahrenheit
- Included temperature controller, 2 water proof Sensors, Manual and wiring diagram for installation
- Equipped with 2 output (one for controlling differential value t2-t1 and another for controlling heating system) and temperature calibration for 2 Sensors
- Temperature range -22 230 °F (-50 110 °C) and power supply: 100-120 V AC/DC with 10 amp built-in relay
- Shipping to USA is 3-6 business days. For more information please go to our website Thermometry
Mini temperature controller thermostat for solar heating water, pump, . . . . with a washer type temperature Sensor This controller is used in a solar water system for controlling the pump (The temperature difference between the two probes) & Heating system (The set pt. Temperature). it has two internal output relays which control the pumps & Heating system. When the temperature reaches the differential set value (t2-t1), it automatically runs the circulation pump, until the two temperature zones reach equilibrium according to your setting, the S relay can be used to control electric heating when the solar heating has failed to reach the set temperature. The electric heating system can automatically start heating to the set temperature, temperature difference controls & automatic constant temperature with in the set range. One set included 1 x mini-temperature controller 2 x temperature Sensor probe with 3M cable 1 x Instruction manual
Solar Temperature Controller, Keenso All-Purpose Digital Temperature Difference Controller Differential Thermostat with Sensor Probe for Solar Water Heater EW-801AH AC 220V 5A (Renewed)
- 【Solar Heating】It will control heating system and automatically makes water temperature stay in temperature deference range. When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium.
- 【For Solar Water Heaters】The products are used in solar water heater, the temperature difference and temperature to control the output. It is provided with two output control, temperature difference control two temperature zone. If you need a temperature control table, our products are a perfect choice.
- 【Detailed Parameter】Operating Temperature: -10℃~50℃, Operating Humidity: RH≤90%, Working Voltage: AC220V ±10%(50Hz/60Hz), Heating Control Range: 2℃~99℃.
- 【Electric Heating】The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature. Two heating modes, you don’t have to worry about not having hot water.
- 【Keenso Guarantee】Keenso is the right owner to sale this item, for your safety and protection of use, so do not purchase from other seller, otherwise you may get WRONG ITEM. Our product is tested to ensure trouble-free installation and performance, please rest assured to buy.
SBE Solar Tech Digital Differential Thermostat w/Pwr Supply and Solid State Relay
- – SPDT relay output. This means you have “normally open” and “normally closed” output
- – LCD display of current sensor temperatures, current differential, and differential setpoint.
- Freeze protection, will not trip relay if either of the sensors are disconnected, or below freezing
- – User selectable Celsius/Fahrenheit readout.
- – Will run from just about any “wall wart” type power supply. (not included)
Digital Differential Thermostat for your solar project. I use one of these to trip the pump on my solar hot water collectors, but they have many uses. Building a solar hot water system? Want to recover the heat from you attic in the winter? This will work perfectly to turn your pumps or fans on and off.I rate the output section of this circuit board for 24V, AC or DC, and it can handle 5 amps. Note that this is a thermostat and not a motor controller, to turn on or off motors that run on AC line voltages you should use a proper relay or contactor, and control that with this thermostat.I include two temperature sensors with this item. They are linear active temperature sensors that have been cased and potted, with short pieces of wire attached so you can extend them for your project.Included also is a 12V 1A power power supply power the Thermostat, and a 25A Solid State Relay to run your fan/pump.
Conclusion
By our suggestions above, we hope that you can found differential temperature thermonstat for solar hot water for you.Please don’t forget to share your experience by comment in this post. Thank you!
