homedecorcreation 
Nowadays, there are so many products of clear water filter sumps in the market and you are wondering to choose a best one. You have searched for clear water filter sumps in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings clear water filter sumps which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
29,223 Reviews Scanned
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Geekpure 20-Inch Standard Slim Line Clear Filter Housing for Whole House Water Filtration-2.5" x 20" -Inlet/Outlet 3/4" NPT Brass
- COMPLETE-Complete 1 set 20 inch blue housing,3/4 inch ports with pressure relief button for high pressure,with plastic wrench and metal bracket.
- STANDARD-Fits all standard sized 2.5 inch x 20 inch filters.Housing only, filter cartridges are sold separately.
- APPLICATIONS-Large capacity housing for high flow applications,Used in whole house, reverse osmosis, commercial and geekpure filtration.
- Clear housing allows you to see when you need to change filters and everything else works as it should.
- Flow rate: 5-10 GPM (Depend on Feed Water Pressure),Shelf life: 5 Years.
CULLIGAN WH-S200-C Whole House Sediment Water Filter
3/4″, whole house sediment water filter system, clear sump, stainless steel reinforced inlet/outlet, bypass valve with shut off valve, pressure relief button, mounting bracket included, removable filter timer included, integrated bracket design, wrench included, installs easily on 3/4″ main water line, includes P5 filter, uses 3/4″compression x 3/4″ male iron pipe fitting TV #467-621, not included, for replacement cartridges use TV #’s 529-286, 583-393, #583-401 or #614-800, not included, certified to nsf 42.
Pentek 153128 #10 Standard Clear Sump
This Pentek 153128 #10 clear housing sump fits caps for Pentek #10 Standard clear filter housings with any inlet and outlet size, and same size caps made by several other manufacturers. It is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition. This sump meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use with Pentek #10 Standard clear filter housings, which are used in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
KleenWater KW2510HT Whole House or Under Sink Water Filter, Water Filtration System, 2.5 x 10 Inch Housing, Bracket and Wrench (1)
- KleenWater’s best rated heavy duty 2.5 inch x 10 inch filter made in Italy
- Transparent housing provides easy visibility of cartridge condition
- Includes filter wrench
- mounting bracket and screws
- Good for both whole house and point of use applications
- 3/4 inch inlet / outlet with female NPT
Our Kleenwater KW2510HT 2.5 X 10 inch transparent water filter housing is manufactured in Italy from the highest quality and safest materials. The transparent sump is constructed of polyethylene which is considered very safe by specialists knowledgeable about the effects of plastic in the food and beverage industry. Polyethylene is also easily recyclable. It is manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. This filter is very rugged and boasts a 120 psi maximum working pressure. A built-in pressure relief vent and a spanner wrench are included for easy periodic cartridge change out. Included is a mounting bracket with screws. The bracket will help ensure a sturdy installation. The filter head is equipped with 3/4″ NPT inlet/outlet threads.
The component materials are tested and certified by the Water Quality Association (WQA) against NSF / ANSI Standards 42 and 61 for material safety and integrity. The maximum temperature is 120 degrees Fahrenheit.
No cartridges included. This filter requires standard water filters with 2.5 inch width x 9.75 inch length. This is the common industry standard dimension. The system can be employed for both “point of entry” and “point of use” (under sink) applications.
Professional plumbers, contractors and water treatment specialists can save by choosing one of our multi unit selections.
KleenWater is a trademark of Pavel Water Filtration.
Similar items with 4 stars and above
Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"
GE GXWH20S Standard Flow Whole Home Filtration System
- Heavy-duty filtration system: Clear sump allows for easy viewing of filter
- Filters water at the main supply: Install system in basement and/or out of sight
- Premium filtration: Certified to reduce sediment, scale, dirt and rust in your water, appliances and plumbing fixtures
- Easy installation: Includes 3/4″ plumbing connection, pressure relief valve, bypass option, mounting bracket and remote filter reminder light for simple installation and filter change
- Three-month life: For best filtration results, filter (FXWTC, FXUSC, FXWPC or FXWSC) should be replaced every three months
The GE Standard Flow Whole Home Filtration System reduces dirt, silt, sand and rust in your water, providing a clear sump to view filter soil level. Features a bypass option and red pressure-release button for drier filter change. Includes a magnetic filter reminder light, sump wrench and a mounting bracket for easy installation. Entire system NSF/ANSI certified and sized for 3/4″ plumbing.
Pentek 158649 10âx20AC; 3G Slim Line Filter Housing 1/2" Clear Sump IB w/PR
The PENTEK-158649 3G Slim Line 1/2 Inch Clear Filter Housing with Pressure Relief is a useful filter for any water filtration need. This system can be used in partnership with reverse osmosis systems or function on its own as an undersink or whole house filtration component/system. The clear housing allows for visual monitoring of your filter and water flow, giving you the peace of mind that your system is functioning properly and protecting your water. Enjoy the benefits of clean water today!
Conclusion
By our suggestions above, we hope that you can found clear water filter sumps for you.Please don’t forget to share your experience by comment in this post. Thank you!
