Best Hot Water Shut Off Valve
Nowadays, there are so many products of hot water shut off valve in the market and you are wondering to choose a best one. You have searched for hot water shut off valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water shut off valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
20,423 Reviews Scanned
FloodStop Water Heater Auto-Shutoff Valve, FS3/4NPT, V4 Controller, Water Damage Prevention
- PREVENT WATER DAMAGES – This automatic shut off valve will trigger when a leak is detected from your water heater, potentially preventing 200+ gallons of water leaking into your home.
- EASY TO INSTALL – The FloodStop valve is installed between the water heater and the manual shutoff valve
- can be installed in fifteen minutes.
- SENSOR AT BASE OF HEATER – The sensor part of this system is placed at the base of the water heater. As long as the sensor stays dry, the valve will stay open permitting water to flow through to the heater.
- IMMEDIATE SHUTDOWN – Once the leak sensor at the base of the heator senses moisture, the valve will immediately close off all water flow and sound alarms.
- CERTIFIED LEAD FREE – Certified lead free under S. 3874, AB1953 with a One Year Manufacturer’s Warranty.
Prevent flood damage and avoid costly repairs with the easy-to-install, newly designed Lead free Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel’s alarm. Designed for both residential and commercial dwellings. The FloodStop (FS 3/4-NPT) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. This kit includes everything you need to protect your property from costly water-leak damage: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. A power supply is included; you need to also install four AA batteries (not included) for backup power, unit will beep to alert you of low or no batteries. The controller has “one” output contact (normally open) that can be attached to a dialer or security system so you can be alerted to a leak when not home! You can even add multiple water sensors for different areas around your water heater. If your water heater should begin to leak, the controller tells the water valve to close and alerts you with an 87db alarm.
Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve
- WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine.
- WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets.
- SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses
- INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places.
- BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves.
Specification:
- Item Weight: 4 ounces
- Overall Dimension: 1.1 x 3.6 x 2.2 inches
- Size: 0.5 inch
- Material: Brass Body, Copper Straight Dual Adapter
These Watts manual washing machine shutoff valves are designed to control water flow from the hot and cold water supply piping to the flexible hoses feeding a washing machine. With a flip of its lever, you can turn the water on or off, thus protecting the washing machine parts and hoses from water damage, avoiding the potentially catastrophic results of a burst washing machine hose. It has single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses. It can be installed in a more convenient spot than old boiler drain type hot and cold water shutoffs which are often installed in hard to reach places. This makes shutting off the water supply easier. The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves.
Quarter Turn 3 Way Valve 1/2-Inch FIP by 3/8-Inch OD by 3/8-Inch OD Dual Handle, Lead-Free
Plumb Pak’s lead-free quarter-turn 3-way valve 1/2 FIP by 3/8 OD by 3/8 OD dual handle has dual outlet shut off valves that are ideal for kitchens with more than one appliance requiring water. Design allows you to turn off water to one source while still allowing water to be supplied to another source.
Dramm 114960 036434 4 Heavy-Duty Brass Shut-Off Valve, Single
- Dramm Heavy-Duty Brass Shut-Off designed to provide fingertip water control at the end of your water hose
- Ergonomic, large, quarter-turn handle controls water flow- even with wet or arthritic hands
- Best Shut-Off available & Assembled in USA with American & foreign components
- Full water flow design with 3/4” standard hose thread
- Withstands higher pressure than comparable valves.
American Valve M75LS 1/2" Washing Machine Valve, 1/2-Inch
HQMPC Heavy Duty Brass Shut Off Valve Garden Hose Shut Off Valve Garden Hose Connector (2PCS) +4 Extra Pressure Washers
- IMPORTANT NOTE: Do not tighten this to the faucet too much! No pliers!! Hand tighten-then Heavy Duty Brass Shut Off valve,brass one way valve,Solid Brass construction,no leakage
- The package include 2pcs brass garden hose shut off valve,4pcs pressure washers
- The best garden hose connector: Easy to turn on and off
- 4pcs free rubber gaskets for replacement
- brass shut off valve for garden hose, we provide 3 years gurantee. Just order them with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you
Gilmour Heavy Duty Hose Connector Single Shut-Off Valve Bass 803004-1001
Product Description
Shut off valve offers easy on, off and flow control; Solid Brass body features a large control knob for ease of use and an EZ on Connector; Swivel action allows hose to turn, preventing kinks.
From the Manufacturer
Gilmour’s quality-made brass high flow shut-off valves have 35% more water flow than regular shut-off valves. Flows to match any watering need.
EZ-Fluid 3/8" OD Comp x 1/2" PEX 1/4-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free Barb Crimp Ring Type (20-Packs)
- Pack of 20 Pcs Pex Angle Stop Water shut off ball Valve
- Shut-Off Chrome Brass Angle Stop Valve for Faucets and Toilets
- Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953
- 1/4-turn valve operation means only a quarter turn of the handle
- Inlet: 1/2″ PEX Barb Crimp Ring Typ, Outlet: 3/8″ OD Compression
EZ-FLUID 1/2 in. Chrome-Plated Brass PEX Barb Crimp Ring Type x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. Also capable of integration into hydronic heating systems. Constructed of chrome-plated lead free brass for superior reliability and strength Most economical piping system available Quarter-turn handle design for simple flow control Compatible with PEX pipe Meets UPC, IPC and cUPC standard Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves NSF listed Barb x compression connection for PEX plumbing systems Rated to 200°F and 200 psi
Heavy Duty Squared Body 1/2 in. NOM Comp Inlet x 3/8 in. OD Compression Outlet Chrome Plated Brass 1/4 Turn Angle Valve (5 Pack)
- Contractor 5 pack. Solid lead-free brass construction. Includes all compression rings and nuts.
- Heavy duty squared-body design to fit wrench tightly when tightening. Perfect for residential and commercial applications.
- 1/4-turn ball valve style for durability and easy on/off operation.
- For use with cold or hot water feed with water temperatures of 40-140 Degrees Fahrenheit.
- High quality, shiny chrome-plated brass made from lead free compliant material.
Contractor pack of 5. This heavy duty 1/4 turn angle stop valve is the solution to long lasting, dependable shut-off valve you need to put in for your residence, commercial properties, and all places that require an angle shut-off valve. 3/8-in OD compression, chrome plated, window tray. For use in potable water distribution systems.
Conclusion
By our suggestions above, we hope that you can found hot water shut off valve for you.Please don’t forget to share your experience by comment in this post. Thank you!