Best 1060 Gpu Cooling Block

100% new, fine workmanship, simple sense is very strong!
Bykski N-GX1060-X for Pcasl All Series Reference Version GTX 1060 design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist (3/8ID*1/2OD) X 2
plugs X 2
Thermal paste X 1
mounting screws X 1
RGB LED X 1
Compatible graphics card type:NVIDIA Quadro P2000
Compatible graphics card type: All Series Reference Version GTX 1060
Compatible graphics card type:ZOTAC GTX 1060 AMPED
Compatible graphics card type:NVIDIA Quadro P2000
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

Compatibilities List (Including but not limited to the following models)
Please send us message to confirm if you are not sure about the compatibilities. Thanks.
Asus ROG-STRIX-GTX 1080TI-O11G-GAMING
Asus ROG-STRIX-GTX 1080-O8G-GAMING
Asus ROG-STRIX-GTX 1070TI-8G-GAMING
Asus ROG-STRIX-GTX 1070-O8G-GAMING
Asus ROG-STRIX-GTX 1070-8G-GAMING
Asus DRAGON GTX 1070-O8G
Asus DRAGON GTX 1070-TOP8G
Asus ROG-STRIX-GTX 1060-O6G-GAMING

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance! Direct cooling of the graphics core (GPU), memory (RAM) key heating parts of the graphics, to ensure stability when overclocking.
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful. The upper cover using high quality POM materials or acrylic to ensure block long life and durability.
4. Inlet and outlet can change direction free, easy to build CF and Crossfire system.

Please Pay Attention:
1. Please double check the graphics card detail model to ensure compatibility
2. 2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant.
5. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.

Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.

Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40

Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)

Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

Antec
KUHLER H2O 920V4, 620V4, 920, 620

Zalman
LQ-320, LQ-315, LQ-310

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

The EK-FC1080 GTX Ti Strix RGB is a high-performance full-cover water block for all ASUS ROG Strix GeForce GTX 1080 Ti graphics cards versions on the market! The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti Strix RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

Model: 3830046995698

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

Product Description

Pre-filled, never needs refilling
Customer Service / Tech support: 1-888-222-4346 opt. 1

From the Manufacturer

Hydro Series H55 is the easy cooling upgrade for your Intel CPU. The efficient, self-contained liquid cooling system is quieter and more efficient than stock CPU fans, and the compact design makes it ideal for smaller cases.

Overview

The Easy Intel CPU Performance Upgrade

Your PC will run cooler and quieter when you replace your CPU’s standard heatsink with a Hydro Series H55.

Installation is straightforward: if you can get to the back of your PC’s motherboard, you can install an H55. All you’ll need is a screwdriver.

Great for Smaller Cases

The compact components and flexible tubing make Hydro Series H55 easy to install even if you’re cramped for space. It allows you to improve your CPU’s cooling efficiency even in most compact cases — as long as your case has a 120mm fan mount near the CPU, H50 will probably fit.

Features

Self-contained cooling system

Hydro Series H55 comes pre-filled, and never needs refilling or priming.

Tool-free mounting bracket kit

The modular design makes installation simpler, and it’s compatible with all modern Intel processors.

Low-noise, low-speed 120mm fan

The low speed and wide diameter reduces noise levels over the smaller, faster fans used on stock CPU coolers. The three-pin connector is compatible with fan controllers.

Low permeability rubber tooling

Minimal coolant evaporation helps ensure long life, and the resilient rubber offers both high flexibility and excellent leak protection.

Low-profile pump

The pump unit provides high-speed circulation without taking a lot of space. This makes installation easier, and helps improve your case’s airflow.

Latest generation micro-fin copper cold plate with pre-applied thermal compound

Copper has excellent thermal transfer characteristics, and the fin design is optimized for efficient heat exchange.

Low-profile black aluminum heat exchanger

The low-profile design reduces the airflow requirement, which helps make H55 quieter. The small size also allows for easier installation and improved compatibility, and the black finish looks great.

Corsair Hydro Series Liquid CPU Coolers

	H40	H55	H60	H70 CORE	H80	H80i	H100	H100i
CPU Compatibility	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD
Fans Included	One 120mm	One 120mm	One 120mm	None	Dual 120mm	Dual 120mm	Dual 120mm	Dual 120mm
Fan Dimensions	120mm x 120mm x 25mm	120mm x 120mm x 25mm	120mm x 120mm x 25mm	—	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)
Radiator Dimensions	150mm x 120mm x 25mm	120mm x 152mm x 27mm	120mm x 152mm x 27mm	152mm x 120mm x 38mm	120mm x 152mm x 42mm	120mm x 152mm x 38mm	122mm x 275mm x 25mm	120mm x 275mm x 27mm
Cold Plate	Aluminum	Copper	Copper	Copper	Copper	Copper	Copper	Copper
Corsair Link Compatible	—	—	—	—	✔ (with additional hardware)	✔	✔ (with additional hardware)	✔
Selectable Fan Profiles	—	—	—	—	✔	✔	✔	✔

The GeForce GTX 1060 graphics card is loaded with innovative new gaming technologies, making it the perfect choice for the latest high-definition games. Powered by NVIDIA Pascal – the most advanced GPU architecture ever created-the GeForce GTX 1060 delivers brilliant performance that opens the door to virtual reality and beyond.

The glacier G1080 founders Edition is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, Acrylic top and sandblasted cover plates for an elegant look. Glacier G1080 founders Edition is a full cover water block. The G1080 founders Edition water block covers the entire PCB of the card allowing the graphics card and its VRM to remain cool and stable. The G1080 founders Edition water block has a 9mm copper base for higher level of heat dissipation and heat transfer. The sealing is ensured by DuPont Viton rubber washers. The military-grade Viton increase temperature capability and stands up to aggressive fluids. The Viton rubber washers offers ruggedness so seals and components resist damage during installation and use. The Viton retains sealing force to prevent leaks even after compression for long periods. Glacier G1080 founders Edition uses the same RGB connector as our Phanteks cases so installation will be a breeze. With the RGB control of our compatible Phanteks cases, the G1080 founders Edition can synchronize with the case. Use the included RGB adapter (ph-cb4rgb) and you can sync with motherboards’ that support the 4pin RGB header including the ROG aura/MSI mystic light. The water block features a connection terminal that has a significantly Reduced flow resistance for an outstanding cooling performance.

EK-FC1080 GTX Ti Backplate is a CNC machined retention backplate made from nickel-plated aluminum for EK-FC1080 GTX Ti series water blocks.

Backplate covers the whole length of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of voltage regulation module (VRM).

This backplate is guaranteed to be compatible only with reference design NVIDIA GeForce GTX 1080 Ti graphics cards.

Enclosed:
– EK-FC1080 GTX Ti Backplate – Nickel
– Mounting mechanism
– Thermal pads

Made in Slovenia – Europe!

Model: 3831109831946

Conclusion

By our suggestions above, we hope that you can found 1060 gpu cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!