Which Is The Best 1080 Ti Cooling Kit

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

Thermaltake Pacific v-gtx 10 series founders Edition transparent water block is a full cover water block including an aluminum alloy back plate. Compatible with NVIDIA GeForce GTX 1080/1070 fe models, deliver the ultimate in cooling performance. Featuring 0.5mm internal fin construction, the Pacific v-gtx 10 series is manufactured with cnc machined copper base, nickel plating for ideal protection and supporting G1/4 threaded fittings. Included hardware supports users for easy installation. See the true power of liquid cooling with the Thermaltake Pacific GTX 10 series GPU water block.

The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.

Model: 3831109863473

An RGB upgrade kit for existing EK-FC1080 GTX Ti FTW3 high-performance full-cover water blocks that fit EVGA® GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal™ architecture (GP102). The upgrade kit includes a 4-pin 12V RGB LED strip.

The kit enables a quick and easy upgrade of the existing EK-FC1080 GTX Ti FTW3 to the latest RGB version of the full-cover water block. The kit includes all necessary parts to perform the upgrade, including a fresh set of screws, thermal pads, O-rings, Allen keys, new RGB ready plexi top, aluminum cover with an already installed RGB strip and a fresh EK badge. The only things reused from the previous block are the nickel plated cold plate and the terminal.

To avoid cracking your brand new RGB plexi top, use only 0.5 – 0.7 Nm of torque force on the terminal screws. Do not use excessive force when re-tightening the screws as the plexi top might crack or the threads might get stripped thus rendering the water block useless.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.

Enclosed:

– EK-FC1080 GTX Ti FTW3 RGB plexi top
– Mounting mechanism with screw-in brass standoffs
– Black anodized aluminum cover
– 4-pin 12V RGB LED strip
– Necessary mounting screws
– 2,5mm Allen key
– 2mm Allen key
– Thermal pad RAM 0.5mm
– Thermal pad 0.5mm
– Thermal pad 1mm
– Main O-ring (OR 152×2)
– 2x spare O-rings (OR 15×1)
– EK badge

Made in Slovenia – Europe!

Model: 3831109802281

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

Set your sights on this OMEN 880 ultra-performance desktop PC with jaw-dropping speeds, a cutting-edge design with carbon fiber appearance and industry’s latest hardware! This PC is geared for easy upgrade-ability with a tool-less door for quick access, up to four 3.5” hard drive bays, two bays which are hot-swappable! The hassle-free liquid cooling system quietly draws heat away from one of Intel’s highest rated unlocked Core i7 performance processors. A massive 750 watt platinum PSU powers everything along with Nvidia’s flagship series graphics card and comes wired for an SLI solution. Eluktronics is ready to tailor your next PC exactly to your needs with customizable selections for the SSD, RAM capacity and even optional dual 1080 Ti SLI solutions.

Operating System: Windows 10 Home 64-Bit

Processor: Intel Core i7-8700K Hexa Core (3.7-4.7GHz TurboBoost, 12MB Cache)

Cooling: HP ENVY Liquid Cooling Solution (95W)

RAM: 16GB DDR4 RAM (2 Dimm)

Graphics: 11GB GDDR5X NVIDIA GeForce GTX 1080 Ti [3 DisplayPorts; 1 HDMI]

Total Storage: 1,512GB (512GB SSD + 1TB 7200RPM HDD)

Primary: 512GB Ultra Performance PCIe NVME SSD

Secondary: 1TB 7200RPM SATA III Storage Hard Drive

Optical: SuperMulti DVD Burner

Wi-Fi: 802.11a/b/g/n/ac (2×2) and Bluetooth 4.2

Keyboard & Mouse: HP USB Wired Keyboard with volume control & Wired Mouse

Ports: Front I/O: 2 USB 3.0; 2 USB 3.0 Type-C; 1 microphone jack; 1 headphone jack, Rear I/O: 4 USB 3.0; 2 USB 2.0; 10/100/1000 Gigabit Ethernet, 3-in-1 Media Card Reader, Audio Inputs

Audio: DTS Studio Sound

Power: 750 Watt Platinum Efficiency Power Supply

Warranty: 1 Year HP Warranty
Eluktronics also provides USA based support during the warranty for the entire PC. Reach out for fast & clear assistance!

Conclusion

By our suggestions above, we hope that you can found 1080 ti cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!