homedecorcreation 
Nowadays, there are so many products of 30 micron diesel fuel filter water separator in the market and you are wondering to choose a best one. You have searched for 30 micron diesel fuel filter water separator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 30 micron diesel fuel filter water separator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
28,944 Reviews Scanned
UTSAUTO R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 Complete Combo Filter fit Racor R12T 10 Micron Marine Diesel Engine 3/8 Inch NPT Outboard Motor Durable Spin-on Housing
- Don’t be caught in the water without one of these diesel spin-on filters .Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- Notice: This a separator for Diesel & Water, It could not be for Petrol & Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Filter Assy
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water
- Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well, 10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from gasoline
UTSAUTO R12T Fuel Filter Water Separator
Specification:
- Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
- Maximum Flow Rate 30 GPH (57 LPH).
- Port / Connecting Size M18 X 1.5 Center Thread.
- These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
- Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Feature:
- Don’t be caught in the water without one of these Diesel spin-on filters.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
- The inlet and out let can be feed in on the same side or in one side out the other side.
- Check and replace regularly.
R12T Water separator & filter complete combo installation instruction:
- Nylon collection bowl down when installed the water separator and filter.
- This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports.
- If you need to use two plugs, you must install them to the filter and tighten them.
- Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
- All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
CARMOCAR 30 Micron Diesel Fuel Filter Water Seperator Hand Primer Pump 3/8 NPT
- 30 Micron Diesel Fuel Filter Water Seperator
- One Year Warranty
- The mounting bracket is made from lightweight and corrosion resistant cast aluminum.
- You can use Racor S3202 listed below
- you can use Wix 33118 21 Micron, Purolator PER96, Baldwin BF580, BF5813, Donaldson P556915 25 Micron, or Fram P1146 replacement elements.
2 fuel inlet and 2 fuel outlet ports allow you to have fuel come in and out from one or both sides of the filter
giving you multiple plumbing options.
2 plugs are included if you only need 1 inlet and 1 outlet port.
The fuel ports are 3/8″ NPT threaded for easy connection with common brass, plastic, zinc plated steel or stainless steel fittings.
Ebely R12T Fuel Fittings Marine Spin-on Fuel Filter Water Separator 120AT NPT ZG1/4-19 Fit Gasoline Engine and Diesel Engine
- Fitment：Gasoline Engine and Diesel Engine
- This R12T fuel filter water separator is equipped with a self-draining drain to remove unnecessary dirt and water, the filter design is easy to replace, and the reusable transparent nylon collection bowl
- This is a separator for diesel and water, and a separator for gasoline and water.
- The flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean
- The filter unit coated with a durable coating of electrostatic powder coating, having excellent corrosion resistance
Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.
GOLDENROD 496-3/4 WATER-BLOCK FILTER (56591) Bowl Fuel Tank Filter with 3/4" NPT Top Cap
- Removes water from gasoline & diesel fuel,
- 17 micron filtration,
- Water absorbing polymers trap water
- Restricting fuel flow when it is time to replace the element,
- May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element
- Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- See-Through bowl allows for visual monitoring of fuel flow
- Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi
WATER-BLOCK filter removes water from gasoline and diesel fuel. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Also removes microscopic particles (17 microns) of rust, sand, dirt, scale and lint. Also compatible with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. See-Thru bowl allows for visual monitoring of fuel flow. Maximum recommended flow rate is 25 gpm. Gravity flow rate is approximately 5 gpm with a 24 inch head. Working pressure up to 150 psi.
New 500FG 500FH Diesel Marine Boat Fuel Filter / Water Separator
MAXIMUM FLOW RATE: 60 GPH (227 LPH)
FILTER RATING: 2, 10, and 30 micron
PORT/CONNECTION SIZE: M14*1.5
ADDITIONAL DETAIL: 15 PSI (1.03 bar) Max Pressure
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
FD-4615 5 Micron Fuel Water Separator Filter for HD Ford Truck/Pickup 2011-2016 F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines Powerstroke 6.7 BC3Z9N184B Set of 2
- Package:Four filters: two engine mounted filter and the frame mounted filter, and two gasket/o-ring for the frame mounted filter.
- Fit: 2011-2016 Ford F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines.
- It is the standard fuel filter set for changing the filter in the HFCM and the one on top of the engine.
- Be careful when removing the lower filter housing the first time. Use both a box end wrench on the nut and a strap wrench on the body the first time. Then grease the O-ring and you will be ok after that.
- The micron of this filter is 30.Every 20-22k miles,these need to be changed.
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
Racor 2020PM 2020 30 Micron Diesel Fuel Filter QTY 12
CASE OF 12 NEW RACOR 2020SM (30 MICRON) REPLACEMENT FILTERS FOR 1000 SERIES TURBINE FUEL FILTER WATER SEPARATOR SYSTEM
Conclusion
By our suggestions above, we hope that you can found 30 micron diesel fuel filter water separator for you.Please don’t forget to share your experience by comment in this post. Thank you!
