The 9 Best 20 Micron 20 Inch Water Filter

Deal Score0
Deal Score0
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter
  • The 9 Best 20 Micron 20 Inch Water Filter

Nowadays, there are so many products of 20 micron 20 inch water filter in the market and you are wondering to choose a best one. You have searched for 20 micron 20 inch water filter in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings 20 micron 20 inch water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

14,160 Reviews Scanned
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
4
8.4
Score

$27.24$38.92$52.54

Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score

Aquaboon 5 Micron 20" Big Blue Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with AP810-2, SDC-45-2005, FPMB-BB5-20, P5-20BB, FP25B, 155358-43, 2 Pack

$24.42$34.89$43.26
Last update was on: Sunday, January 5, 2020

Package Quantity:2 |  Size:5 Micron

2 PACK OF 5 MICRON 20″ BIG BLUE SEDIMENT POLYPROPYLENE WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON

Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These Whole House filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron. Catching smaller particles. Each cartridge is individually shrink-wrapped.

Features:
Micron rating: 5 Micron
Dimensions: 20” x 4.5”
Lifetime: Replace two or three times a year, depending on the water quality
Individually shrink wrapped
Flow rate: 5 GPM
Filter life: 20000 – 30000 gallons
Operating Temperature: 39°F~125°F (4°C~52°C)
Max. Operating Pressure: 60 psi
Removes dust, particles, and rust
Good for water filters and aquariums

Compatible Replacement Filters:
Aqua Sun International SWS-BB, AquaPure AP810-2, AXEON Membranes 200640, ClearChoice 84644, Everpure DEV910837, EV910837, Filter Specialist CMMF0520-45W1, Flexeon 200640, FreshWaterSystems MBGC-45200-05, Heritage Parts TMP5618907, Hydronix SDC-45-2005, SDG-45-2005, Ice House America IHA-H00995, Ideal H2O 738358, iSpring FP25B, KaTom 584-5618907, Liquatec SDF-45-2005, Pentek 155358-43, P5-20BB, Pura 33003117, 33003117-1 etc.

Compatible housings:
3M 70020143163, AquaPure AP802, AP802-1.5, Cuno 5557610, CFS02T. Systems from 3M, DuPont, APEC, Whirlpool, Olympia, US Aqua, Pentek, Aquasana, Culligan, Costway, GE, Smart Aqua Life, Geekpure, The Perfect Water, Glacier Bay, Aqua-Pure, Global Water, etc. Universal replacement – fits most 20 inch Big Blue Water Filter housings.

Aquasana Replacement 20-Inch, Sediment Pre-filters for Whole House Water Filter Systems, 4-pack

$20.97$29.95$44.03
Last update was on: Sunday, January 5, 2020

Style:Sediment Pre filters

Product Description

Replacement 20-inch sediment pre-filters for Aquasana Whole House Water Filter Systems – 4 pack. Only use genuine Aquasana replacements for increased performance capacity and certified contaminant removal. The sediment pre-filter is designed to prevent dirt and particles from entering the system and clogging the main filter unit. Designed for easy filter replacement, no plumber required. Filter should be replaced every 1-3 months depending on TDS levels (total dissolved solids) and water quality – replace when you notice that the color of the filter darkens or water flow slows down.

From the Manufacturer

The 20 inch sediment pre-filter is used to prevent dirt and sediment particles from entering and clogging the main filter unit. This cartridge should be replaced every 3-6 months depending on water quality and sediment levels.

iSpring FP25X25-5 Micron 20" X 2.5" Sediment Filter Cartridges, Pack of 25

$55.04$78.63$101.43
Last update was on: Sunday, January 5, 2020

5 Micron high-quality 20″ x 2.5″ Sediment filter cartridges, tested by independent third-party to meet NSF/ANSI Standard.

Product Highlights:
– Individually wrapped, packed in 25 pcs per carton
– Removes dust, particles, and rust
– Good for water filters and aquariums.
– Free tech support before and after sale
– Ship from Atlanta warehouse daily. Only 2-day transit time for most states in Eastern Time zone and part of Central time zone (including Texas) We also carry many other home filter systems. Please check our Amazon store for other items.

Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"

$27.24$38.92$52.54
Last update was on: Sunday, January 5, 2020

Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge

$11.82$16.89$19.25
Last update was on: Sunday, January 5, 2020

Size:4-1/2″ OD x 20″ Length

This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.

Specifications

Nominal filtration rating (pre-filter) 50 microns
Nominal filtration rating (post-filter) 5 microns
Initial pressure drop at 20 gpm <1>
Temperature range 40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W) 20 x 4-1/2 inches (508 x 114 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns

$28.76$41.09$50.95
Last update was on: Sunday, January 5, 2020

Color:White

This Pentek EPM-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 30,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating 10 microns
Initial pressure drop at 4 gpm 4 psi
Chlorine reduction capacity 30,000 gallons at 4 gpm
Temperature range 40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W) 20 x 4-5/8 inches (508 x 118 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Similar items with 4 stars and above

Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20" x 2-1/2", 5 Micron

$11.03$15.76$19.7
Last update was on: Sunday, January 5, 2020

Color:White

This Pentek C1-20 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 5,000 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of cellulose media that has been impregnated with powdered activated carbon (PAC), with a polyester backing and external polyethylene netting for strength. It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in residential drinking water purification.

Specifications

Nominal filtration rating 5 microns
Initial pressure drop at 5 gpm 1 psi
Chlorine reduction capacity 5,000 gallons at 2 gpm
Operating temperature range 40 to 125 degrees F (4.4 to 51.7 degrees C)
Maximum dimensions (H x W) 20 x 2-1/2 inches (508 x 64 mm)

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Aquaboon 5 Micron 20" Big Blue Pleated Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with ECP5-BB, AP810-2, HDC3001, CP5-BB, SPC-45-1005, ECP1-20BB, 1-Pack

$15.8$22.57$32.05
Last update was on: Sunday, January 5, 2020

1 OF BIG BLUE WHOLE HOUSE 20 INCH X 4.5 INCH PLEATED SEDIMENT WATER FILTER REPLACEMENT CARTRIDGE (5 MICRON)

Pleated Sediment Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other “depth” type filter elements. It provides increased surface area and longer filter life. Additional savings are provided because cartridge is made with 100% synthetic filter media with no binders or additives to leave a residue or contaminants.

Product Details:
Micron Rating: 5 Micron
Dimensions: 20” x 4.5”
Long life / reduced filtration costs
Cleanable and reusable
Wide range of micron ratings available
Shrink wrapped for purity
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply.

Benefits VS Melt Blown Sediment:
Long Pressure drop, longer life, reduced filtration costs compared to wound and spun cartridges
Increased dirt holding capacity which results in longer filter life, fewer filter replacement needed, and reduced filtrations costs, comparing to other pleated cartridge suppliers

COMPATIBLE FILTERS AND HOUSINGS:
Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5, Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.

Aquaboon 1 Micron 20" Big Blue Pleated Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with ECP5-BB, AP810-2, HDC3001, CP5-BB, SPC-45-1005, ECP1-20BB, 2-Pack

$27.64$39.49$55.29
Last update was on: Sunday, January 5, 2020

2 OF BIG BLUE WHOLE HOUSE 20 INCH X 4.5 INCH PLEATED SEDIMENT WATER FILTER REPLACEMENT CARTRIDGE (1 MICRON)

Pleated Sediment Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other “depth” type filter elements. It provides increased surface area and longer filter life. Additional savings are provided because cartridge is made with 100% synthetic filter media with no binders or additives to leave a residue or contaminants.

Product Details:
Micron Rating: 1 Micron
Dimensions: 20” x 4.5”
Long life / reduced filtration costs
Cleanable and reusable
Wide range of micron ratings available
Shrink wrapped for purity
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply.

Benefits VS Melt Blown Sediment:
Long Pressure drop, longer life, reduced filtration costs compared to wound and spun cartridges
Increased dirt holding capacity which results in longer filter life, fewer filter replacement needed, and reduced filtrations costs, comparing to other pleated cartridge suppliers

COMPATIBLE FILTERS AND HOUSINGS:
Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5, Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.

Conclusion

By our suggestions above, we hope that you can found 20 micron 20 inch water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!

10 Total Score
Excellent

Best 20 micron 20 inch water filter: Top-Rated Brands & What to Buy

User Rating: 4.9 (424 votes)